Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
Set-AdfsProperties
- Module:
- ADFS Module
Sets the properties that control global behaviors in AD FS.
Syntax
Default (Default)
Set-AdfsProperties
[-AuthenticationContextOrder <Uri[]>]
[-AcceptableIdentifiers <Uri[]>]
[-AddProxyAuthorizationRules <String>]
[-ArtifactDbConnection <String>]
[-AuditLevel <String[]>]
[-AutoCertificateRollover <Boolean>]
[-CertificateCriticalThreshold <Int32>]
[-CertificateDuration <Int32>]
[-CertificateGenerationThreshold <Int32>]
[-CertificatePromotionThreshold <Int32>]
[-CertificateRolloverInterval <Int32>]
[-CertificateThresholdMultiplier <Int32>]
[-ClientCertRevocationCheck <String>]
[-ContactPerson <ContactPerson>]
[-DisplayName <String>]
[-EnableOAuthDeviceFlow <Boolean>]
[-EnableOAuthLogout <Boolean>]
[-FederationPassiveAddress <String>]
[-HostName <String>]
[-HttpPort <Int32>]
[-HttpsPort <Int32>]
[-IntranetUseLocalClaimsProvider <Boolean>]
[-TlsClientPort <Int32>]
[-Identifier <Uri>]
[-LogLevel <String[]>]
[-MonitoringInterval <Int32>]
[-NetTcpPort <Int32>]
[-NtlmOnlySupportedClientAtProxy <Boolean>]
[-OrganizationInfo <Organization>]
[-PreventTokenReplays <Boolean>]
[-ExtendedProtectionTokenCheck <String>]
[-ProxyTrustTokenLifetime <Int32>]
[-ReplayCacheExpirationInterval <Int32>]
[-SignedSamlRequestsRequired <Boolean>]
[-SamlMessageDeliveryWindow <Int32>]
[-SignSamlAuthnRequests <Boolean>]
[-SsoLifetime <Int32>]
[-SsoEnabled <Boolean>]
[-PersistentSsoLifetimeMins <Int32>]
[-KmsiLifetimeMins <Int32>]
[-EnablePersistentSso <Boolean>]
[-PersistentSsoCutoffTime <DateTime>]
[-EnableKmsi <Boolean>]
[-WIASupportedUserAgents <String[]>]
[-BrowserSsoSupportedUserAgents <String[]>]
[-BrowserSsoEnabled <Boolean>]
[-LoopDetectionTimeIntervalInSeconds <Int32>]
[-LoopDetectionMaximumTokensIssuedInInterval <Int32>]
[-EnableLoopDetection <Boolean>]
[-ExtranetLockoutMode <String>]
[-ExtranetLockoutThreshold <Int32>]
[-EnableExtranetLockout <Boolean>]
[-ExtranetObservationWindow <TimeSpan>]
[-ExtranetLockoutRequirePDC <Boolean>]
[-SendClientRequestIdAsQueryStringParameter <Boolean>]
[-GlobalRelyingPartyClaimsIssuancePolicy <String>]
[-EnableLocalAuthenticationTypes <Boolean>]
[-EnableRelayStateForIdpInitiatedSignOn <Boolean>]
[-DelegateServiceAdministration <String>]
[-AllowSystemServiceAdministration <Boolean>]
[-AllowLocalAdminsServiceAdministration <Boolean>]
[-DeviceUsageWindowInDays <Int32>]
[-EnableIdPInitiatedSignonPage <Boolean>]
[-IgnoreTokenBinding <Boolean>]
[-IdTokenIssuer <Uri>]
[-PromptLoginFederation <PromptLoginFederation>]
[-PromptLoginFallbackAuthenticationType <String>]
[-Force]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Set-AdfsProperties cmdlet sets the properties that control global behaviors in Active Directory Federation Services (AD FS).
Examples
Example 1: Set the ADFS properties
PS C:\> $Timespan = New-TimeSpan -Minutes 60
PS C:\> Set-AdfsProperties -EnableExtranetLockout $True -ExtranetLockoutThreshold 4 -ExtranetObservationWindow $Timespan
The first command creates a TimsSpan object and stores the result in the variable named $Timespan.
The second command sets an extranet lockout algorithm with a threshold of 4 max bad password attempts before lockout. The command also sets the observation window for the value stored in the $Timespan variable.
Parameters
-AcceptableIdentifiers
Specifies an array of identifiers that are acceptable names for the Federation Service when it checks the audience for claims that it receives from another claims provider.
Parameter properties
| Type: | Uri[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-AddProxyAuthorizationRules
This parameter is deprecated.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-AllowLocalAdminsServiceAdministration
Indicates that local administrator service administration is allowed.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-AllowSystemServiceAdministration
Indicates that system service administration is allowed.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ArtifactDbConnection
Specifies the connection string to use for the database that maintains the artifacts that the artifact resolution service uses.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-AuditLevel
Specifies an array of audit levels. The acceptable values for this parameter are:
- None
- Basic
- Verbose
Parameter properties
| Type: | String[] |
| Default value: | None |
| Accepted values: | None, Basic, Verbose |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-AuthenticationContextOrder
Specifies an array of authentication contexts, in order of relative strength. Specify each authentication context as a URI.
Parameter properties
| Type: | Uri[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-AutoCertificateRollover
Indicates whether the system manages certificates for the administrator and generates new certificates before the expiration date of current certificates. By default, this setting is enabled for a new instance of AD FS.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-BrowserSsoEnabled
Indicates that browser single sign-on (SSO) is enabled.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-BrowserSsoSupportedUserAgents
Specifies an array of user agents that are supported for browser SSO.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-CertificateCriticalThreshold
Specifies the period of time, in days, prior to the expiration of a current primary signing or decryption certificate. When a certificate reaches this threshold, the Federation Service initiates the automatic certificate rollover service, generates a new certificate, and promotes it as the primary certificate. This rollover process occurs even if the critical threshold interval does not provide sufficient time for partners to replicate the new metadata. Specify a short period of time that is used only in extreme conditions when the Federation Service has not been able to generate a new certificate in advance.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-CertificateDuration
Specifies the period of time, in days, that any certificates that the Federation Service generates remain valid.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-CertificateGenerationThreshold
Specifies the period of time, in days, before the Federation Service generates a new primary certificate to replace the current primary certificate. When a certificate reaches this threshold, the Federation Service initiates an automatic certificate rollover process that generates a new certificate and adds it to the secondary collection. This rollover process occurs so that federation partners can consume this metadata in advance and trust is not broken when this newly generated certificate is promoted to be a primary certificate.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-CertificatePromotionThreshold
Specifies the period of time, in days, during which a newly generated certificate remains a secondary certificate before being promoted as the primary certificate.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-CertificateRolloverInterval
Specifies the certificate rollover interval, in minutes. This value determines the frequency at which the Federation Service initiates the rollover service by polling to check whether new certificates need to be generated.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-CertificateThresholdMultiplier
Specifies the certificate threshold multiplier. By default, this parameter uses the number of minutes in a day (1440) as a multiplier. Change this value only if you want to use a more finely detailed measure of time, such as less than a single day, for calculating the time periods for other certificate threshold parameters.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ClientCertRevocationCheck
Do not use this parameter.
Instead, use the netsh http command to configure certificate settings.
Parameter properties
| Type: | String |
| Default value: | None |
| Accepted values: | CheckChain, CheckChainCacheOnly, CheckChainExcludeRoot, CheckChainExcludeRootCacheOnly, CheckEndCert, CheckEndCertCacheOnly, None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
-ContactPerson
Specifies the contact information for support issues.
Parameter properties
| Type: | ContactPerson |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-DelegateServiceAdministration
Specifies the delegate service administration.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-DeviceUsageWindowInDays
Specifies the length of the device usage window in days.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-DisplayName
Specifies a friendly name for the Federation Service.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableExtranetLockout
Indicates whether to enable the lockout algorithm for extranet. When enabled, AD FS checks attributes in Active Directory for the user before validating the credential. If the user is determined to be in lockout state, AD FS will deny the request to the user when accessing from the extranet, to prevent random login attempts from the extranet. Intranet access will continue to be validated against Active Directory. By default, this feature is disabled in a new instance of AD FS and must be explicitly enabled by the administrator.
When this feature is enabled AD FS must be able to contact the Primary Domain Controller (PDC) of the user's domain.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableIdPInitiatedSignonPage
Specifies whether to enable the EnableIdPInitiatedSignonPage property.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableKmsi
Indicates whether to enable the Keep Me Signed In (KMSI) option for form-based authentication. KMSI is limited to providing only 24 hours of SSO. Note that a workplace joined device gets 7 days of SSO by default and does not need this option enabled.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableLocalAuthenticationTypes
Indicates that local authentication types are enabled.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableLoopDetection
Indicates whether to enable loop detection. Loops occur when a relying party continuously rejects a valid security token and redirects back to AD FS. The cycle terminates after 6 loops have been detected.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableOAuthDeviceFlow
Enables the OAuth Device Flow.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableOAuthLogout
Enables the OAuth logout endpoint publishing in the OAuth discovery document. The OAuth logout endpoint logs out the current user from the AD FS. This parameter is available with the Windows Update KB4019472 installed. The AD FS does not support logging out a federated user from the federated identity provider when using the OAuth logout endpoint with Windows Update KB4019472 installed. The Windows Update KB4038801 makes this parameter obsolete and the value of this parameter to be always true. The Windows Update KB4038801 also adds support for logging our a federated user from the federated identity provider when using the OAuth logout endpoint.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnablePersistentSso
Indicates whether to store the SSO token in persistent cookies for devices joined to a workplace.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableRelayStateForIdpInitiatedSignOn
Indicates that relay state for issuing distribution point (IDP) initiated sign-on is enabled.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ExtendedProtectionTokenCheck
Specifies the level of extended protection for authentication supported by the federation server. Extended Protection for Authentication helps protect against man-in-the-middle (MITM) attacks, in which an attacker intercepts a client's credentials and forwards them to a server. Protection against such attacks is made possible through a Channel Binding Token (CBT) which can be either required, allowed or not required by the server when establishing communications with clients.
The acceptable values for this parameter are:
- Require. Server is fully hardened, extended protection is enforced
- Allow. Server is partially hardened, extended protection is enforced where systems involved have been patched to support it
- None. Server is vulnerable, extended protection is not enforced
The default setting is Allow.
Parameter properties
| Type: | String |
| Default value: | None |
| Accepted values: | Allow, Require, None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ExtranetLockoutMode:
Specifies Extranet Smart Lockout mode.
Parameter properties
| Type: | String |
| Default value: | ADPasswordCounter |
| Accepted values: | ADPasswordCounter, ADFSSmartLockoutLogOnly, ADFSSmartLockoutEnforce |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ExtranetLockoutRequirePDC
Specifies whether extranet lockout requires a primary domain controller (PDC).
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ExtranetLockoutThreshold
Specifies the maximum number of bad password attempts permitted against the directory before the account is throttled when accessing applications from the extranet. If you use Active Directory® Domain Services account lockout policies, it is strongly recommended that you set this threshold to a value that is less than the threshold in AD DS to avoid lockout of the user inside and outside the network.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ExtranetObservationWindow
Specifies the timespan of the lockout observation window. AD FS will reset a throttled state of an account when more than one observation window has expired since the last bad password attempt, as reported by Active Directory Domain Services. It is also possible that the last bad password field in AD DS is cleared by AD DS based on its own observation windows. In this case, AD FS will allow the request to be passed onto AD DS for validation.
Parameter properties
| Type: | TimeSpan |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FederationPassiveAddress
Do not use this parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Force
Forces the command to run without asking for user confirmation.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-GlobalRelyingPartyClaimsIssuancePolicy
Specifies a global relying party claims issuance policy.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-HostName
Specifies the network addressable host name of the Federation Service.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-HttpPort
Specifies the HTTP port for the server.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-HttpsPort
Specifies the HTTPS port for the server.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Identifier
Specifies the URI that uniquely identifies the Federation Service.
Parameter properties
| Type: | Uri |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-IdTokenIssuer
Specifies the URI of the token issuer.
Parameter properties
| Type: | Uri |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-IgnoreTokenBinding
Specifies whether to ignore token binding.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-IntranetUseLocalClaimsProvider
Indicates whether all web based requests from the intranet default to the default Active Directory claims provider. Use this parameter only when there is more than one claims provider trust in AD FS and you want all user access from the intranet to use the default Active Directory for authentication.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-KmsiLifetimeMins
Specifies the lifetime of the sign on status for KMSI.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-LogLevel
Specifies an array of log detail. The array defines which types of events to record. The acceptable values for this parameter are:
- Errors
- Warnings
- Information
- SuccessAudits
- FailureAudits
Parameter properties
| Type: | String[] |
| Default value: | None |
| Accepted values: | Errors, FailureAudits, Information, Verbose, None, SuccessAudits, Warnings |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-LoopDetectionMaximumTokensIssuedInInterval
Specifies the maximum number of tokens that can be issued within the time period specified by the LoopDetectionTimeIntervalInSeconds parameter before AD FS will reject the request and present an error to the user. Use in conjunction with the LoopDetectionMaximumTokensIssuedInInterval parameter.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-LoopDetectionTimeIntervalInSeconds
Specifies the time interval in seconds for AD FS to track multiple token requests that are occurring and being rejected by the relying party causing a redirect back to AD FS for a new token request. Use in conjunction with the LoopDetectionMaximumTokensIssuedInInterval parameter.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-MonitoringInterval
Specifies the frequency, in minutes, with which the Federation Service monitors the federation metadata of relying parties and claims providers that are enabled for federation metadata monitoring.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-NetTcpPort
Specifies the TCP port number for the server.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-NtlmOnlySupportedClientAtProxy
Indicates whether to enable support for NTLM-based authentication in situations where the active federation server proxy does not support Negotiate method of authentication. This setting only affects the Windows transport endpoint. If this value is changed, the federation server proxy needs to be restarted.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-OrganizationInfo
Specifies information about the organization as published in the federation metadata for the Federation Service.
Parameter properties
| Type: | Organization |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PersistentSsoCutoffTime
Specifies the earliest issue time of accepted persistent single sign-on (SSO) tokens and OAuth refresh tokens. Persistent SSO tokens or OAuth refresh tokens issued before this time will be rejected. Use this only to reject all prior SSO state across all users and force users to provide fresh credentials.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PersistentSsoLifetimeMins
Specifies the duration, in minutes, of the persistent SSO experience.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PreventTokenReplays
Indicates whether the Federation Service prevents the replay of security tokens.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PromptLoginFallbackAuthenticationType
This parameter is obsolete. Please set this property on individual Claims Provider Trusts.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PromptLoginFederation
This parameter is obsolete. Please set this property on individual Claims Provider Trusts.
Parameter properties
| Type: | PromptLoginFederation |
| Default value: | None |
| Accepted values: | None, FallbackToProtocolSpecificParameters, ForwardPromptAndHintsOverWsFederation, Disabled |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ProxyTrustTokenLifetime
Specifies the valid token lifetime, in minutes, for proxy trust tokens. This value is used by the federation server proxy to authenticate with its associated federation server.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ReplayCacheExpirationInterval
Specifies the cache duration, in minutes, for token replay detection. This value determines the lifetime for tokens in the replay cache. When the age of a cached token exceeds this interval, the Federation Service determines the token has expired and does not allow replay of it.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SamlMessageDeliveryWindow
Specifies the duration, in minutes, for which the Security Assertion Markup Language (SAML) messages sent by the Federation Service are considered valid.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SendClientRequestIdAsQueryStringParameter
Indicates whether the client request id, or activity id, is sent as a query string on any redirect from AD FS that is sent to itself. This enables all servers in AD FS to use the same client request id when logging any messages in eventlogs, traces and audits. As a result, it is easier to troubleshoot a single request across multiple AD FS servers in the farm. The default value is $True.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SignedSamlRequestsRequired
Indicates whether the Federation Service requires signed SAML protocol requests from the relying party. If you specify a value of $True, the Federation Service rejects unsigned SAML protocol requests.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SignSamlAuthnRequests
Indicates whether the Federation Service signs SAML protocol authentication requests to claims providers.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SsoEnabled
This parameter is deprecated.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SsoLifetime
Specifies the duration, in minutes, of the single sign-on (SSO) experience for Web browser clients.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-TlsClientPort
Specifies the port number where AD FS listens for user certificate authentication requests. Use this only when user certificate authentication is used in AD FS.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
-WIASupportedUserAgents
Specifies an array of acceptable user agents that support seamless sign-in with Windows Integrated Authentication. If AD FS receives a token request and policy selects Windows Integrated Authentication, AD FS uses this list to determine if it needs to fall back to forms-based authentication. When the user agent for the incoming request is not in this list, AD FS falls back to forms-based authentication.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Outputs
Object
Related Links
Feedback
Was this page helpful?