Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
New-AzLoadBalancerProbeConfig
- Module:
- Az.Network Module
Creates a probe configuration for a load balancer.
Syntax
Default (Default)
New-AzLoadBalancerProbeConfig
-Name <String>
[-Protocol <String>]
-Port <Int32>
-IntervalInSeconds <Int32>
-ProbeCount <Int32>
[-ProbeThreshold <Int32>]
[-RequestPath <String>]
[-NoHealthyBackendsBehavior <String>]
[-DefaultProfile <IAzureContextContainer>]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The New-AzLoadBalancerProbeConfig cmdlet creates a probe configuration for an Azure load balancer.
Examples
Example 1: Create a probe configuration
New-AzLoadBalancerProbeConfig -Name "MyProbe" -Protocol "http" -Port 80 -IntervalInSeconds 15 -ProbeCount 15 -ProbeThreshold 15 -NoHealthyBackendsBehavior "AllProbedUp"
This command creates a probe configuration named MyProbe using the HTTP protocol. The new probe will connect to a load-balanced service on port 80.
Example 2
Creates a probe configuration for a load balancer. (autogenerated)
New-AzLoadBalancerProbeConfig -IntervalInSeconds 15 -Name 'MyProbe' -Port 80 -ProbeCount 15 -ProbeThreshold 15 -Protocol 'http' -RequestPath 'healthcheck.aspx'
Parameters
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
-DefaultProfile
The credentials, account, tenant, and subscription used for communication with azure.
Parameter properties
| Type: | IAzureContextContainer |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | AzContext, AzureRmContext, AzureCredential |
Parameter sets
-IntervalInSeconds
Specifies the interval, in seconds, between probes to each instance of a load-balanced service.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Name
Specifies the name of the probe configuration to create.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-NoHealthyBackendsBehavior
Determines how new connections are handled by the load balancer when all backend instances are probed down. The acceptable values for this parameter are: AllProbedDown or AllProbedUp.
Parameter properties
| Type: | String |
| Default value: | AllProbedDown |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Port
Specifies the port on which the new probe should connect to a load-balanced service.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ProbeCount
Specifies the number of per-instance consecutive failures for an instance to be considered unhealthy.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ProbeThreshold
Specifies the number of consecutive successful or failed probes in order to allow or deny traffic from being delivered to this endpoint.
Parameter properties
| Type: | |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Protocol
Specifies the protocol to use for the probe configuration. The acceptable values for this parameter are: Tcp or Http.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RequestPath
Specifies the path in a load-balanced service to probe to determine health.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
String
Int32
Outputs
PSProbe
Related Links
Azure PowerShell
Feedback
Was this page helpful?