Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
Set-CMSoftwareUpdateGroup
- Module:
- ConfigurationManager Module
Changes configuration settings for software update groups in Configuration Manager.
Syntax
SetById (Default)
Set-CMSoftwareUpdateGroup
-Id <Int32>
[-AddSoftwareUpdate <IResultObject[]>]
[-ClearExpiredSoftwareUpdate]
[-ClearSoftwareUpdate]
[-ClearSupersededSoftwareUpdate]
[-Description <String>]
[-NewName <String>]
[-PassThru]
[-RemoveSoftwareUpdate <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
SetByValueMandatory
Set-CMSoftwareUpdateGroup
-InputObject <IResultObject>
[-AddSoftwareUpdate <IResultObject[]>]
[-ClearExpiredSoftwareUpdate]
[-ClearSoftwareUpdate]
[-ClearSupersededSoftwareUpdate]
[-Description <String>]
[-NewName <String>]
[-PassThru]
[-RemoveSoftwareUpdate <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
SetByName
Set-CMSoftwareUpdateGroup
-Name <String>
[-AddSoftwareUpdate <IResultObject[]>]
[-ClearExpiredSoftwareUpdate]
[-ClearSoftwareUpdate]
[-ClearSupersededSoftwareUpdate]
[-Description <String>]
[-NewName <String>]
[-PassThru]
[-RemoveSoftwareUpdate <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Set-CMSoftwareUpdateGroup cmdlet changes the name or description of one or more Configuration Manager software update groups, or it adds or removes software update groups for one or more security scopes.
A software update group is a collection of one or more software updates. You can add software updates to a software update group and then deploy the group to clients. After you deploy a software update group, you can add new software updates to the group and Configuration Manager automatically deploys them.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1: Add a software update group to a security scope
PS XYZ:\> Set-CMSoftwareUpdateGroup -SecurityScopeAction AddMembership -SecurityScopeName "ScopeNameD02" -Name "SUGroup01"
This command adds a software update group named SUGroup01 as a member of the security scope named ScopeNameD02.
Example 2: Remove a software update group from a security scope
PS XYZ:\> Set-CMSoftwareUpdateGroup -SecurityScopeAction RemoveMembership -SecurityScopeName "ScopeNameD17" -Name "SUGroup01"
This command removes the software update group named SUGroup01 from membership in the security scope named ScopeNameD17.
Parameters
-AddSoftwareUpdate
The Set-CMSoftwareUpdateGroup cmdlet changes the name or description of one or more Configuration Manager software update groups, or it adds or removes software update groups for one or more security scopes.
A software update group is a collection of one or more software updates. You can add software updates to a software update group and then deploy the group to clients. After you deploy a software update group, you can add new software updates to the group and Configuration Manager automatically deploys them.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | AddSoftwareUpdates |
Parameter sets
-ClearExpiredSoftwareUpdate
The Set-CMSoftwareUpdateGroup cmdlet changes the name or description of one or more Configuration Manager software update groups, or it adds or removes software update groups for one or more security scopes.
A software update group is a collection of one or more software updates. You can add software updates to a software update group and then deploy the group to clients. After you deploy a software update group, you can add new software updates to the group and Configuration Manager automatically deploys them.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ClearSoftwareUpdate
The Set-CMSoftwareUpdateGroup cmdlet changes the name or description of one or more Configuration Manager software update groups, or it adds or removes software update groups for one or more security scopes.
A software update group is a collection of one or more software updates. You can add software updates to a software update group and then deploy the group to clients. After you deploy a software update group, you can add new software updates to the group and Configuration Manager automatically deploys them.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ClearSupersededSoftwareUpdate
The Set-CMSoftwareUpdateGroup cmdlet changes the name or description of one or more Configuration Manager software update groups, or it adds or removes software update groups for one or more security scopes.
A software update group is a collection of one or more software updates. You can add software updates to a software update group and then deploy the group to clients. After you deploy a software update group, you can add new software updates to the group and Configuration Manager automatically deploys them.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
-Description
Specifies a description for a software update group.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | LocalizedDescription |
Parameter sets
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Id
Specifies an array of IDs of software update groups.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | CIId, CI_ID |
Parameter sets
-InputObject
Specifies a software group object. To obtain a software group object, use the Get-CMSoftwareUpdateGroup cmdlet.
Parameter properties
| Type: | IResultObject |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Name
Specifies an array of names of software update groups.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | LocalizedDisplayName |
Parameter sets
-NewName
Specifies a name for a software update group. This name replaces the current name of the group.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PassThru
Add this parameter to return an object that represents the item with which you're working. By default, this cmdlet may not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveSoftwareUpdate
The Set-CMSoftwareUpdateGroup cmdlet changes the name or description of one or more Configuration Manager software update groups, or it adds or removes software update groups for one or more security scopes.
A software update group is a collection of one or more software updates. You can add software updates to a software update group and then deploy the group to clients. After you deploy a software update group, you can add new software updates to the group and Configuration Manager automatically deploys them.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | RemoveSoftwareUpdates |
Parameter sets
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
System.Object
Related Links
Feedback
Was this page helpful?