Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
Set-CMTSStepPrestartCheck
- Module:
- ConfigurationManager Module
Configure an instance of the Check Readiness task sequence step.
Syntax
ByValue (Default)
Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-CheckCMClientMinVersion <Boolean>]
[-CheckMaxOSVersion <Boolean>]
[-CheckMemory <Boolean>]
[-CheckMinOSVersion <Boolean>]
[-CheckNetworkConnected <Boolean>]
[-CheckNetworkWired <Boolean>]
[-CheckTpmEnabled <Boolean>]
[-CheckTpmActivated <Boolean>]
[-CheckOS <Boolean>]
[-CheckOSArchitecture <Boolean>]
[-CheckOSLanguageId <Boolean>]
[-CheckPowerState <Boolean>]
[-CheckSpace <Boolean>]
[-CheckSpeed <Boolean>]
[-CheckUefi <Boolean>]
[-CMClientMinVersion <String>]
[-DiskSpace <Int32>]
[-MaxOSVersion <String>]
[-Memory <Int32>]
[-MinOSVersion <String>]
[-OS <OSType>]
[-OSArchitecture <OSArch>]
[-OSLanguageId <Int32>]
[-Speed <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ById
Set-CMTSStepPrestartCheck
-TaskSequenceId <String>
[-CheckCMClientMinVersion <Boolean>]
[-CheckMaxOSVersion <Boolean>]
[-CheckMemory <Boolean>]
[-CheckMinOSVersion <Boolean>]
[-CheckNetworkConnected <Boolean>]
[-CheckNetworkWired <Boolean>]
[-CheckTpmEnabled <Boolean>]
[-CheckTpmActivated <Boolean>]
[-CheckOS <Boolean>]
[-CheckOSArchitecture <Boolean>]
[-CheckOSLanguageId <Boolean>]
[-CheckPowerState <Boolean>]
[-CheckSpace <Boolean>]
[-CheckSpeed <Boolean>]
[-CheckUefi <Boolean>]
[-CMClientMinVersion <String>]
[-DiskSpace <Int32>]
[-MaxOSVersion <String>]
[-Memory <Int32>]
[-MinOSVersion <String>]
[-OS <OSType>]
[-OSArchitecture <OSArch>]
[-OSLanguageId <Int32>]
[-Speed <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByName
Set-CMTSStepPrestartCheck
-TaskSequenceName <String>
[-CheckCMClientMinVersion <Boolean>]
[-CheckMaxOSVersion <Boolean>]
[-CheckMemory <Boolean>]
[-CheckMinOSVersion <Boolean>]
[-CheckNetworkConnected <Boolean>]
[-CheckNetworkWired <Boolean>]
[-CheckTpmEnabled <Boolean>]
[-CheckTpmActivated <Boolean>]
[-CheckOS <Boolean>]
[-CheckOSArchitecture <Boolean>]
[-CheckOSLanguageId <Boolean>]
[-CheckPowerState <Boolean>]
[-CheckSpace <Boolean>]
[-CheckSpeed <Boolean>]
[-CheckUefi <Boolean>]
[-CMClientMinVersion <String>]
[-DiskSpace <Int32>]
[-MaxOSVersion <String>]
[-Memory <Int32>]
[-MinOSVersion <String>]
[-OS <OSType>]
[-OSArchitecture <OSArch>]
[-OSLanguageId <Int32>]
[-Speed <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionIfStatement
Set-CMTSStepPrestartCheck
-TaskSequenceId <String>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionIfStatement
Set-CMTSStepPrestartCheck
-TaskSequenceName <String>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionIfStatement
Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionVariable
Set-CMTSStepPrestartCheck
-TaskSequenceId <String>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionVariable
Set-CMTSStepPrestartCheck
-TaskSequenceName <String>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionVariable
Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionFile
Set-CMTSStepPrestartCheck
-TaskSequenceId <String>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionFile
Set-CMTSStepPrestartCheck
-TaskSequenceName <String>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionFile
Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionFolder
Set-CMTSStepPrestartCheck
-TaskSequenceId <String>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionFolder
Set-CMTSStepPrestartCheck
-TaskSequenceName <String>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionFolder
Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionQueryWmi
Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionOperatingSystem
Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionRegistry
Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionSoftware
Set-CMTSStepPrestartCheck
-InputObject <IResultObject>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionSoftware
Set-CMTSStepPrestartCheck
-TaskSequenceId <String>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionSoftware
Set-CMTSStepPrestartCheck
-TaskSequenceName <String>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionQueryWmi
Set-CMTSStepPrestartCheck
-TaskSequenceId <String>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionQueryWmi
Set-CMTSStepPrestartCheck
-TaskSequenceName <String>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionRegistry
Set-CMTSStepPrestartCheck
-TaskSequenceId <String>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionRegistry
Set-CMTSStepPrestartCheck
-TaskSequenceName <String>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionOperatingSystem
Set-CMTSStepPrestartCheck
-TaskSequenceId <String>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionOperatingSystem
Set-CMTSStepPrestartCheck
-TaskSequenceName <String>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
Use this cmdlet to configure an instance of the Check Readiness task sequence step.
For more information on this step, see About task sequence steps: Check Readiness.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1
This example changes the Check Readiness step in the Default OS deployment task sequence to disable the checks for AC power and wired network.
$tsNameOsd = "Default OS deployment"
$tsStepNameCheckReady = "Check Readiness"
Set-CMTSStepPrestartCheck -TaskSequenceName $tsNameOsd -StepName $tsStepNameCheckReady -CheckPowerState $false -CheckNetworkWired $false
Parameters
-AddCondition
Specify a condition object to add to this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | AddConditions |
Parameter sets
-CheckCMClientMinVersion
Set this parameter to $true to enable the Minimum client version check. Use the parameter CMClientMinVersion to set the specific client version number.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | CheckClientMinVersion |
Parameter sets
-CheckMaxOSVersion
Set this parameter to $true to enable the Maximum OS version check. Use the parameter MaxOSVersion to set the specific OS version number.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-CheckMemory
Set this parameter to $true to enable the Minimum memory (MB) check. Use the parameter Memory to set the specific memory size.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | EnableCheckMemory |
Parameter sets
-CheckMinOSVersion
Set this parameter to $true to enable the Minimum OS version check. Use the parameter MinOSVersion to set the specific OS version number.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-CheckNetworkConnected
Set this parameter to $true to enable the Network adapter connected check.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | NetworkConnected |
Parameter sets
-CheckNetworkWired
Set this parameter to $true to enable the Network adapter is not wireless check.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | NetworkWired |
Parameter sets
-CheckOS
Set this parameter to $true to enable the check for the type of OS, either client or server. Use the parameter OS to set the specific OS type.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | EnableCheckOSType |
Parameter sets
-CheckOSArchitecture
Set this parameter to $true to enable the Architecture of current OS check. Use the parameter OSArchitecture to set the specific architecture type.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-CheckOSLanguageId
Set this parameter to $true to enable the check of the Language of current OS. Use the parameter OSLanguageID to set the specific language.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | EnableCheckOSLanguageId |
Parameter sets
-CheckPowerState
Set this parameter to $true to enable the AC power plugged in check.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | NotBattery |
Parameter sets
-CheckSpace
Set this parameter to $true to enable the Minimum free disk space (MB) check. Use the parameter DiskSpace to set the specific size.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | EnableCheckFreeDiskSpace |
Parameter sets
-CheckSpeed
Set this parameter to $true to enable the Minimum processor speed (MHz) check. Use the parameter Speed to set the specific speed.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | EnableCheckProcessorSpeed |
Parameter sets
-CheckTpmActivated
Applies to version 2111 and later. Set this parameter to $true to enable the TPM 2.0 or above is activated check.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | TpmActivated |
Parameter sets
-CheckTpmEnabled
Applies to version 2111 and later. Set this parameter to $true to enable the TPM 2.0 or above is enabled check.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | TpmEnabled |
Parameter sets
-CheckUefi
Applies to version 2006 and later. Set this parameter to $true to enable the Computer is in UEFI mode check.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ClearCondition
Remove a condition from this step. Use the -Condition parameter to specify the condition to remove.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | ClearConditions |
Parameter sets
-CMClientMinVersion
Use this parameter to configure the specific client version. Specify the client version in the following format: 5.00.8913.1005. Use the parameter CheckCMClientMinVersion to enable or disable the check.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | ClientMinVersion |
Parameter sets
-Condition
Specify a condition object to use with this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | SubCondition, SubConditions |
Parameter sets
-ConditionVariableName
Specify the name of the task sequence variable to use as a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Variable |
Parameter sets
-ConditionVariableValue
Specify the value of the task sequence variable to use in a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Value |
Parameter sets
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
-Description
Specify an optional description for this task sequence step.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-DiskSpace
Use this parameter to configure the specific size for the minimum free disk space check. Specify an integer value for the size in MB. Use the parameter CheckSpace to enable or disable the check.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | MinimumFreeDiskSpace |
Parameter sets
-FileDateTimeOperator
Specify a variable operator type for a file date/time condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FilePath
Specify the path for a file condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileTimestamp
Specify a date/time value to use for a file condition.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileVersion
Specify a version string for a file condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderDateTimeOperator
Specify a variable operator for a folder date/time condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderPath
Specify the path for a folder condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderTimestamp
Specify a date/time value to use for a folder condition.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-InputObject
Specify a task sequence object from which to get the Check Readiness step. To get this object, use the Get-CMTaskSequence cmdlet.
Parameter properties
| Type: | IResultObject |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | TaskSequence |
Parameter sets
-IsAnyVersion
Use this parameter with the SetConditionSoftware parameter to match any version of the product.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-IsContinueOnError
Use this parameter to enable the step option Continue on error. When you enable this option, if the step fails, the task sequence continues.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IsThisStepContinueOnError |
Parameter sets
-IsEnabled
Use this parameter to enable this task sequence step.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IsThisStepEnabled |
Parameter sets
-MaxOSVersion
Use this parameter to configure the specific OS version. Specify the maximum OS version with major version, minor version, and build number. For example, 10.0.18356. Use the parameter CheckMaxOSVersion to enable or disable the check.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | CurrentMaxOSVersion |
Parameter sets
-Memory
Use this parameter to configure the specific size for the minimum memory check. Specify an integer value for the size in MB. Use the parameter CheckMemory to enable or disable the check.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | MinimumMemory |
Parameter sets
-MinOSVersion
Use this parameter to configure the specific OS version. Specify the minimum OS version with major version, minor version, and build number. For example, 10.0.16299. Use the parameter CheckMinOSVersion to enable or disable the check.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | CurrentMinOSVersion |
Parameter sets
-MoveToIndex
Move this step to the specified index position in the task sequence.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-MsiFilePath
Specify the path to a Windows Installer file for a software condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Namespace
Specify the namespace for a WMI query condition.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-NewStepName
Use this parameter to rename this task sequence step.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-OperatorType
Specify an operator to use with a task sequence variable condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-OS
Use this parameter to configure the specific OS type: Client or Server. Use the parameter CheckOS to enable or disable the check.
Parameter properties
| Type: | OSType |
| Default value: | None |
| Accepted values: | Client, Server |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | CurrentOSType |
Parameter sets
-OSArchitecture
Use this parameter to configure the specific OS architecture: Arch32 for 32-bit or Arch64 for 64-bit. Use the parameter CheckOSArchitecture to enable or disable the check.
Parameter properties
| Type: | OSArch |
| Default value: | None |
| Accepted values: | Arch32, Arch64 |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | CurrentOSArchitecture |
Parameter sets
-OSLanguageId
Use this parameter to configure the specific OS language. This check compares the language ID to the OSLanguage property of the Win32_OperatingSystem WMI class on the client. For example, 1033 for English (United States). Use the parameter CheckOSLanguageId to enable or disable the check.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | LanguageId |
Parameter sets
-Query
Specify a WMI query string to use for a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryKey
Specify the key to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryOperator
Specify an operator to use with a registry condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryValueData
Specify the value data to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryValueName
Specify the value name to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionFile
Use this parameter to remove a file condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionFolder
Use this parameter to remove a folder condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionIfStatement
Use this parameter to remove an if statement condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionOperatingSystem
Use this parameter to remove an OS condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionQueryWmi
Use this parameter to remove a WMI query condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionRegistry
Use this parameter to remove a registry condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionSoftware
Use this parameter to remove a software condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionVariable
Use this parameter to remove a task sequence variable condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RootKey
Specify the root key to use with a registry condition.
Parameter properties
| Type: | RegistryRootKeyType |
| Default value: | None |
| Accepted values: | HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionFile
Add a new file condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionFolder
Add a new folder condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionIfStatement
Add a new if statement condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionOperatingSystem
Add a new OS condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionQueryWmi
Add a new WMI query condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionRegistry
Add a new registry condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionSoftware
Add a new software condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionVariable
Add a new task sequence variable condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Speed
Use this parameter to configure the specific speed for the minimum processor speed check. Specify an integer value for the speed in MHz. Use the parameter CheckSpeed to enable or disable the check.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | MinimumProcessorSpeed |
Parameter sets
-StatementType
Set the type for an if statement condition.
Parameter properties
| Type: | ConditionStatementType |
| Default value: | None |
| Accepted values: | All, Any, None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Operator |
Parameter sets
-StepName
Specify the name of the step to select for changes.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-StepOrder
Use this parameter to reorder the step in the task sequence.
Parameter properties
| Type: | ReorderType |
| Default value: | None |
| Accepted values: | MoveUp, MoveDown, MoveToIndex |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SupportedPlatform
Use this parameter to specify the platforms for an OS condition.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | SupportedPlatforms |
Parameter sets
-TaskSequenceId
Specify the package ID of the task sequence from which to get the Check Readiness step. This value is a standard package ID, for example XYZ00858.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Id, TaskSequencePackageId |
Parameter sets
-TaskSequenceName
Specify the name of the task sequence to target for changes.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ValueType
Specify the type of value for a registry condition.
Parameter properties
| Type: | RegistryValueType |
| Default value: | None |
| Accepted values: | RegistrySZ, RegistryExpandSZ, RegistryDWord |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-VersionOperator
Specify an operator to use with a file condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
System.Object
Related Links
Feedback
Was this page helpful?