Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
Set-CMTSStepReleaseStateStore
- Module:
- ConfigurationManager Module
Configure an instance of the Release State Store task sequence step.
Syntax
ByValue (Default)
Set-CMTSStepReleaseStateStore
-InputObject <IResultObject>
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ById
Set-CMTSStepReleaseStateStore
-TaskSequenceId <String>
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByName
Set-CMTSStepReleaseStateStore
-TaskSequenceName <String>
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionIfStatement
Set-CMTSStepReleaseStateStore
-TaskSequenceId <String>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionIfStatement
Set-CMTSStepReleaseStateStore
-TaskSequenceName <String>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionIfStatement
Set-CMTSStepReleaseStateStore
-InputObject <IResultObject>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionVariable
Set-CMTSStepReleaseStateStore
-TaskSequenceId <String>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionVariable
Set-CMTSStepReleaseStateStore
-TaskSequenceName <String>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionVariable
Set-CMTSStepReleaseStateStore
-InputObject <IResultObject>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionFile
Set-CMTSStepReleaseStateStore
-TaskSequenceId <String>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionFile
Set-CMTSStepReleaseStateStore
-TaskSequenceName <String>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionFile
Set-CMTSStepReleaseStateStore
-InputObject <IResultObject>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionFolder
Set-CMTSStepReleaseStateStore
-TaskSequenceId <String>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionFolder
Set-CMTSStepReleaseStateStore
-TaskSequenceName <String>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionFolder
Set-CMTSStepReleaseStateStore
-InputObject <IResultObject>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionQueryWmi
Set-CMTSStepReleaseStateStore
-InputObject <IResultObject>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionOperatingSystem
Set-CMTSStepReleaseStateStore
-InputObject <IResultObject>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionRegistry
Set-CMTSStepReleaseStateStore
-InputObject <IResultObject>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionSoftware
Set-CMTSStepReleaseStateStore
-InputObject <IResultObject>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionSoftware
Set-CMTSStepReleaseStateStore
-TaskSequenceId <String>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionSoftware
Set-CMTSStepReleaseStateStore
-TaskSequenceName <String>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionQueryWmi
Set-CMTSStepReleaseStateStore
-TaskSequenceId <String>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionQueryWmi
Set-CMTSStepReleaseStateStore
-TaskSequenceName <String>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionRegistry
Set-CMTSStepReleaseStateStore
-TaskSequenceId <String>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionRegistry
Set-CMTSStepReleaseStateStore
-TaskSequenceName <String>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionOperatingSystem
Set-CMTSStepReleaseStateStore
-TaskSequenceId <String>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionOperatingSystem
Set-CMTSStepReleaseStateStore
-TaskSequenceName <String>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
Use this cmdlet to configure an instance of the Release State Store task sequence step.
For more information on this step, see About task sequence steps: Release State Store.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1
This example changes the Release State Store step in the Default OS deployment task sequence to a different name.
$tsNameOsd = "Default OS deployment"
$tsStepNameReleaseSMP = "Release State Store"
Set-CMTSStepReleaseStateStore -TaskSequenceName $tsNameOsd -StepName $tsStepNameReleaseSMP -NewStepName "Release SMP"
Parameters
-AddCondition
Specify a condition object to add to this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | AddConditions |
Parameter sets
-ClearCondition
Remove a condition from this step. Use the -Condition parameter to specify the condition to remove.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | ClearConditions |
Parameter sets
-Condition
Specify a condition object to use with this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | SubCondition, SubConditions |
Parameter sets
-ConditionVariableName
Specify the name of the task sequence variable to use as a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Variable |
Parameter sets
-ConditionVariableValue
Specify the value of the task sequence variable to use in a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Value |
Parameter sets
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
-Description
Specify an optional description for this task sequence step.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileDateTimeOperator
Specify a variable operator type for a file date/time condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FilePath
Specify the path for a file condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileTimestamp
Specify a date/time value to use for a file condition.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileVersion
Specify a version string for a file condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderDateTimeOperator
Specify a variable operator for a folder date/time condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderPath
Specify the path for a folder condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderTimestamp
Specify a date/time value to use for a folder condition.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-InputObject
Specify a task sequence object from which to get the Release State Store step. To get this object, use the Get-CMTaskSequence cmdlet.
Parameter properties
| Type: | IResultObject |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | TaskSequence |
Parameter sets
-IsAnyVersion
Use this parameter with the SetConditionSoftware parameter to match any version of the product.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-IsContinueOnError
Use this parameter to enable the step option Continue on error. When you enable this option, if the step fails, the task sequence continues.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IsThisStepContinueOnError |
Parameter sets
-IsEnabled
Use this parameter to enable this task sequence step.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IsThisStepEnabled |
Parameter sets
-MoveToIndex
Move this step to the specified index position in the task sequence.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-MsiFilePath
Specify the path to a Windows Installer file for a software condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Namespace
Specify the namespace for a WMI query condition.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-NewStepName
Use this parameter to rename this task sequence step.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-OperatorType
Specify an operator to use with a task sequence variable condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Query
Specify a WMI query string to use for a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryKey
Specify the key to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryOperator
Specify an operator to use with a registry condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryValueData
Specify the value data to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryValueName
Specify the value name to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionFile
Use this parameter to remove a file condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionFolder
Use this parameter to remove a folder condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionIfStatement
Use this parameter to remove an if statement condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionOperatingSystem
Use this parameter to remove an OS condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionQueryWmi
Use this parameter to remove a WMI query condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionRegistry
Use this parameter to remove a registry condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionSoftware
Use this parameter to remove a software condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionVariable
Use this parameter to remove a task sequence variable condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RootKey
Specify the root key to use with a registry condition.
Parameter properties
| Type: | RegistryRootKeyType |
| Default value: | None |
| Accepted values: | HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionFile
Add a new file condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionFolder
Add a new folder condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionIfStatement
Add a new if statement condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionOperatingSystem
Add a new OS condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionQueryWmi
Add a new WMI query condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionRegistry
Add a new registry condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionSoftware
Add a new software condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionVariable
Add a new task sequence variable condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-StatementType
Set the type for an if statement condition.
Parameter properties
| Type: | ConditionStatementType |
| Default value: | None |
| Accepted values: | All, Any, None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Operator |
Parameter sets
-StepName
Specify the name of the step to select for changes.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-StepOrder
Use this parameter to reorder the step in the task sequence.
Parameter properties
| Type: | ReorderType |
| Default value: | None |
| Accepted values: | MoveUp, MoveDown, MoveToIndex |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SupportedPlatform
Use this parameter to specify the platforms for an OS condition.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | SupportedPlatforms |
Parameter sets
-TaskSequenceId
Specify the package ID of the task sequence from which to get the Release State Store step. This value is a standard package ID, for example XYZ00858.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Id, TaskSequencePackageId |
Parameter sets
-TaskSequenceName
Specify the name of the task sequence to target for changes.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ValueType
Specify the type of value for a registry condition.
Parameter properties
| Type: | RegistryValueType |
| Default value: | None |
| Accepted values: | RegistrySZ, RegistryExpandSZ, RegistryDWord |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-VersionOperator
Specify an operator to use with a file condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
System.Object
Related Links
Feedback
Was this page helpful?