Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
Set-CMWirelessProfile
- Module:
- ConfigurationManager Module
Sets a wireless profile.
Syntax
ByValue (Default)
Set-CMWirelessProfile
-InputObject <IResultObject>
[-AddSupportedPlatform <IResultObject[]>]
[-AuthenticationMode <AuthenticationMode>]
[-AutoDetectProxy <Boolean>]
[-AutoScriptUrl <String>]
[-BypassProxy <String>]
[-ClearSupportedPlatform]
[-ClientCertificate <IResultObject>]
[-ConfigureProxy <Boolean>]
[-ConnectAutoNetworkInRange <Boolean>]
[-ConnectEvenNotBroadcasting <Boolean>]
[-Description <String>]
[-EapType <EapType>]
[-EnableFipsCompliance <Boolean>]
[-EnablePmkCaching <Boolean>]
[-EnableSingleSignOn <Boolean>]
[-LookOtherNetworkWhileConnected <Boolean>]
[-NetworkName <String>]
[-PassThru]
[-PmkCacheMaxEntries <Int32>]
[-PmkTimeToLiveMins <Int32>]
[-PreAuthAttempts <Int32>]
[-PreAuthentication <Boolean>]
[-ProxyAddress <String>]
[-ProxyPort <Int32>]
[-RememberCredentials]
[-RememberUserCredentials <Boolean>]
[-RemoveSupportedPlatform <IResultObject[]>]
[-RootCertificate <IResultObject[]>]
[-SecurityAuthentication <SecurityAuthentication>]
[-SecurityEncryption <SecurityEncryption>]
[-Severity <NoncomplianceSeverity>]
[-SingleSignOnAdditionalDialogs <Boolean>]
[-SingleSignOnImmediatelyBefore <Boolean>]
[-SingleSignOnMaxDelaySec <Int32>]
[-SingleSignOnVlan <Boolean>]
[-Ssid <String>]
[-TrustedServerCertSubjectNames <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ById
Set-CMWirelessProfile
-Id <Int32>
[-AddSupportedPlatform <IResultObject[]>]
[-AuthenticationMode <AuthenticationMode>]
[-AutoDetectProxy <Boolean>]
[-AutoScriptUrl <String>]
[-BypassProxy <String>]
[-ClearSupportedPlatform]
[-ClientCertificate <IResultObject>]
[-ConfigureProxy <Boolean>]
[-ConnectAutoNetworkInRange <Boolean>]
[-ConnectEvenNotBroadcasting <Boolean>]
[-Description <String>]
[-EapType <EapType>]
[-EnableFipsCompliance <Boolean>]
[-EnablePmkCaching <Boolean>]
[-EnableSingleSignOn <Boolean>]
[-LookOtherNetworkWhileConnected <Boolean>]
[-NetworkName <String>]
[-PassThru]
[-PmkCacheMaxEntries <Int32>]
[-PmkTimeToLiveMins <Int32>]
[-PreAuthAttempts <Int32>]
[-PreAuthentication <Boolean>]
[-ProxyAddress <String>]
[-ProxyPort <Int32>]
[-RememberCredentials]
[-RememberUserCredentials <Boolean>]
[-RemoveSupportedPlatform <IResultObject[]>]
[-RootCertificate <IResultObject[]>]
[-SecurityAuthentication <SecurityAuthentication>]
[-SecurityEncryption <SecurityEncryption>]
[-Severity <NoncomplianceSeverity>]
[-SingleSignOnAdditionalDialogs <Boolean>]
[-SingleSignOnImmediatelyBefore <Boolean>]
[-SingleSignOnMaxDelaySec <Int32>]
[-SingleSignOnVlan <Boolean>]
[-Ssid <String>]
[-TrustedServerCertSubjectNames <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByName
Set-CMWirelessProfile
-Name <String>
[-AddSupportedPlatform <IResultObject[]>]
[-AuthenticationMode <AuthenticationMode>]
[-AutoDetectProxy <Boolean>]
[-AutoScriptUrl <String>]
[-BypassProxy <String>]
[-ClearSupportedPlatform]
[-ClientCertificate <IResultObject>]
[-ConfigureProxy <Boolean>]
[-ConnectAutoNetworkInRange <Boolean>]
[-ConnectEvenNotBroadcasting <Boolean>]
[-Description <String>]
[-EapType <EapType>]
[-EnableFipsCompliance <Boolean>]
[-EnablePmkCaching <Boolean>]
[-EnableSingleSignOn <Boolean>]
[-LookOtherNetworkWhileConnected <Boolean>]
[-NetworkName <String>]
[-PassThru]
[-PmkCacheMaxEntries <Int32>]
[-PmkTimeToLiveMins <Int32>]
[-PreAuthAttempts <Int32>]
[-PreAuthentication <Boolean>]
[-ProxyAddress <String>]
[-ProxyPort <Int32>]
[-RememberCredentials]
[-RememberUserCredentials <Boolean>]
[-RemoveSupportedPlatform <IResultObject[]>]
[-RootCertificate <IResultObject[]>]
[-SecurityAuthentication <SecurityAuthentication>]
[-SecurityEncryption <SecurityEncryption>]
[-Severity <NoncomplianceSeverity>]
[-SingleSignOnAdditionalDialogs <Boolean>]
[-SingleSignOnImmediatelyBefore <Boolean>]
[-SingleSignOnMaxDelaySec <Int32>]
[-SingleSignOnVlan <Boolean>]
[-Ssid <String>]
[-TrustedServerCertSubjectNames <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1
PS XYZ:\>
Parameters
-AddSupportedPlatform
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | AddSupportedPlatforms |
Parameter sets
-AuthenticationMode
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | AuthenticationMode |
| Default value: | None |
| Accepted values: | Disabled, MachineOrUser, Machine, User, Guest |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-AutoDetectProxy
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-AutoScriptUrl
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-BypassProxy
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ClearSupportedPlatform
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ClientCertificate
{{ Fill ClientCertificate Description }}
Parameter properties
| Type: | IResultObject |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ConfigureProxy
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
-ConnectAutoNetworkInRange
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ConnectEvenNotBroadcasting
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Description
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EapType
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | EapType |
| Default value: | None |
| Accepted values: | AKA, AKAprime, FAST, LEAP, PEAP, SIM, TLS, TTLS |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableFipsCompliance
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnablePmkCaching
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableSingleSignOn
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Id
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | CI_ID, CIId |
Parameter sets
-InputObject
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | IResultObject |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-LookOtherNetworkWhileConnected
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Name
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-NetworkName
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet may not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PmkCacheMaxEntries
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PmkTimeToLiveMins
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PreAuthAttempts
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-PreAuthentication
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ProxyAddress
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ProxyPort
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RememberCredentials
{{ Fill RememberCredentials Description }}
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RememberUserCredentials
{{ Fill RememberUserCredentials Description }}
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveSupportedPlatform
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | RemoveSupportedPlatforms |
Parameter sets
-RootCertificate
{{ Fill RootCertificate Description }}
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | RootCertificates |
Parameter sets
-SecurityAuthentication
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SecurityAuthentication |
| Default value: | None |
| Accepted values: | Undefined, Open, WPA_Personal, WPA2_Personal, WPA_Enterprise, WPA2_Enterprise, Shared, WEP |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SecurityEncryption
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SecurityEncryption |
| Default value: | None |
| Accepted values: | Undefined, None, WEP, TKIP, AES |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Severity
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | NoncomplianceSeverity |
| Default value: | None |
| Accepted values: | None, Informational, Warning, Critical, CriticalWithEvent |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SingleSignOnAdditionalDialogs
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SingleSignOnImmediatelyBefore
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SingleSignOnMaxDelaySec
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SingleSignOnVlan
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Ssid
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-TrustedServerCertSubjectNames
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
System.Object
Feedback
Was this page helpful?