Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
New-CMTSNetworkAdapterSetting
- Module:
- ConfigurationManager Module
Create a settings object for a network adapter on the Apply Network Settings task sequence step.
Syntax
Default (Default)
New-CMTSNetworkAdapterSetting
[-Dns <String[]>]
[-EnableDnsRegistration]
[-EnableFullDnsRegistration]
[-EnableIpProtocolFiltering]
[-EnableLmHosts]
[-EnableTcpFiltering]
[-EnableUdpFiltering]
[-Gateway <String[]>]
[-IpAddress <Hashtable[]>]
[-IpProtocolFilterList <String[]>]
[-Metric <Int32>]
-Name <String>
[-TcpFilterPortList <Int32[]>]
[-TcpIpNetbiosOption <NetbiosOption>]
[-UdpFilterPortList <Int32[]>]
[-Wins <String[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
This cmdlet creates a network adapter settings object. Use this object with the AddAdapterSetting parameter on the New-CMTSStepApplyNetworkSetting or Set-CMTSStepApplyNetworkSetting cmdlets.
For more information, see About task sequence steps: Apply Network Settings.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1: Add network adapter settings for a connection with multiple addresses
This example first defines three array variables that define the multiple addresses. The $dns variable is an array with two DNS server addresses. The $gw variable is an array with two gateway addresses. The $ip variable is an array with two hashtables. Each hashtable defines an IP address and subnet mask pair.
The next line of the example uses the New-CMTSNetworkAdapterSetting cmdlet to create the network adapter settings object. It uses the defined variables, and sets several other options.
The final part of this example configures an existing Apply Network Settings step of a task sequence named Default OS deployment. It adds the network adapter settings to the step, and configures the DNS suffix.
$dns = @("192.168.1.100","10.0.1.100")
$gw = @("192.168.1.1","10.0.1.1")
$ip = @(
@{ IP = "192.168.1.42"; Mask = "255.255.255.0"; },
@{ IP = "10.0.1.42"; Mask = "255.255.242.0"; }
)
$conn1 = New-CMTSNetworkAdapterSetting -Name "local connection" -Dns $dns -EnableDnsRegistration -EnableFullDnsRegistration -Gateway $gw -IpAddress $ip -TcpIpNetbiosOption DisableNetbiosOverTcpip
$tsNameOsd = "Default OS deployment"
$tsStepNameApplyNetSet = "Apply Network Settings"
Set-CMTSStepApplyNetworkSetting -TaskSequenceName $tsNameOsd -StepName $tsStepNameApplyNetSet -AddAdapterSetting $conn1 -DnsSuffix "corp.contoso.com"
Parameters
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Dns
Specify one or more DNS server addresses in order of use.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | DNSServerAddress, DNSServerAddresses |
Parameter sets
-EnableDnsRegistration
Add this parameter to register this connection's addresses in DNS. This setting applies to all connections with TCP/IP enabled. To specify the DNS suffix, use the DnsSuffix parameter on the New-CMTSStepApplyNetworkSetting or Set-CMTSStepApplyNetworkSetting cmdlets.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableFullDnsRegistration
Add this parameter to use the connection's DNS suffix in DNS registration. This setting applies to all connections with TCP/IP enabled. To specify the DNS suffix, use the DnsSuffix parameter on the New-CMTSStepApplyNetworkSetting or Set-CMTSStepApplyNetworkSetting cmdlets.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableIpProtocolFiltering
Add this parameter to filter some IP protocols. To enable TCP/IP filtering, use the EnableTcpIpFiltering parameter on the New-CMTSStepApplyNetworkSetting or Set-CMTSStepApplyNetworkSetting cmdlets.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableLmHosts
Add this parameter to enable LMHOSTS lookup.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableTcpFiltering
Add this parameter to filter some TCP ports. To enable TCP/IP filtering, use the EnableTcpIpFiltering parameter on the New-CMTSStepApplyNetworkSetting or Set-CMTSStepApplyNetworkSetting cmdlets.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableUdpFiltering
Add this parameter to filter some UDP ports. To enable TCP/IP filtering, use the EnableTcpIpFiltering parameter on the New-CMTSStepApplyNetworkSetting or Set-CMTSStepApplyNetworkSetting cmdlets.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Gateway
If this connection doesn't use DHCP, use this parameter to specify one or more gateway addresses.
If needed, use the Metric parameter. By default, the gateway uses an automatic metric.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | GatewayIpAddress, GatewayIpAddresses |
Parameter sets
-IpAddress
If this connection doesn't use DHCP, use this parameter to specify one or more IP addresses and corresponding subnet masks. The value is a hashtable. The first value is the IP and the second value is the Mask.
For example: @{ IP = "192.168.1.42"; Mask = "255.255.255.0"; }
If you need to specify more than one IP address and subnet mask combination, use an array of hashtables.
For example: @( @{ IP = "192.168.1.42"; Mask = "255.255.255.0"; }, @{ IP = "10.0.1.42"; Mask = "255.255.242.0"; } )
Parameter properties
| Type: | Hashtable[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | NetworkSettingIpAddress, NetworkSettingIpAddresses |
Parameter sets
-IpProtocolFilterList
When you use the EnableIpProtocolFiltering parameter, use this parameter to specify one or more IP protocols.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Metric
Specify the metric that indicates the cost of using the Gateway. If you don't specify this parameter, the gateway uses an automatic metric.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | GatewayCostMetric |
Parameter sets
-Name
Specify a unique name for this connection.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-TcpFilterPortList
When you use the EnableTcpFiltering parameter, use this parameter to specify one or more TCP ports.
Parameter properties
| Type: | Int32[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-TcpIpNetbiosOption
Specify whether to enable or disable NetBIOS over TCP/IP.
Parameter properties
| Type: | NetbiosOption |
| Default value: | None |
| Accepted values: | Default, EnableNetbiosOverTcpip, DisableNetbiosOverTcpip |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-UdpFilterPortList
When you use the EnableUdpFiltering parameter, use this parameter to specify one or more UDP ports.
Parameter properties
| Type: | Int32[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
-Wins
Specify one or more WINS server addresses.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | WinsServerAddress, WinsServerAddresses |
Parameter sets
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
None
Outputs
IResultObject
Notes
For more information on this return object and its properties, see SMS_TaskSequence_NetworkAdapterSettings server WMI class.
Related Links
Feedback
Was this page helpful?