Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
Set-CMTSStepInstallApplication
- Module:
- ConfigurationManager Module
Configure an instance of the Install Application task sequence step.
Syntax
ByValue (Default)
Set-CMTSStepInstallApplication
-InputObject <IResultObject>
[-Application <IResultObject[]>]
[-BaseVariableName <String>]
[-ClearCache <Boolean>]
[-EnableContinueOnInstallError <Boolean>]
[-RetryCount <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ById
Set-CMTSStepInstallApplication
-TaskSequenceId <String>
[-Application <IResultObject[]>]
[-BaseVariableName <String>]
[-ClearCache <Boolean>]
[-EnableContinueOnInstallError <Boolean>]
[-RetryCount <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByName
Set-CMTSStepInstallApplication
-TaskSequenceName <String>
[-Application <IResultObject[]>]
[-BaseVariableName <String>]
[-ClearCache <Boolean>]
[-EnableContinueOnInstallError <Boolean>]
[-RetryCount <Int32>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionIfStatement
Set-CMTSStepInstallApplication
-TaskSequenceId <String>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionIfStatement
Set-CMTSStepInstallApplication
-TaskSequenceName <String>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionIfStatement
Set-CMTSStepInstallApplication
-InputObject <IResultObject>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionVariable
Set-CMTSStepInstallApplication
-TaskSequenceId <String>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionVariable
Set-CMTSStepInstallApplication
-TaskSequenceName <String>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionVariable
Set-CMTSStepInstallApplication
-InputObject <IResultObject>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionFile
Set-CMTSStepInstallApplication
-TaskSequenceId <String>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionFile
Set-CMTSStepInstallApplication
-TaskSequenceName <String>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionFile
Set-CMTSStepInstallApplication
-InputObject <IResultObject>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionFolder
Set-CMTSStepInstallApplication
-TaskSequenceId <String>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionFolder
Set-CMTSStepInstallApplication
-TaskSequenceName <String>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionFolder
Set-CMTSStepInstallApplication
-InputObject <IResultObject>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionQueryWmi
Set-CMTSStepInstallApplication
-InputObject <IResultObject>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionOperatingSystem
Set-CMTSStepInstallApplication
-InputObject <IResultObject>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionRegistry
Set-CMTSStepInstallApplication
-InputObject <IResultObject>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionSoftware
Set-CMTSStepInstallApplication
-InputObject <IResultObject>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionSoftware
Set-CMTSStepInstallApplication
-TaskSequenceId <String>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionSoftware
Set-CMTSStepInstallApplication
-TaskSequenceName <String>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionQueryWmi
Set-CMTSStepInstallApplication
-TaskSequenceId <String>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionQueryWmi
Set-CMTSStepInstallApplication
-TaskSequenceName <String>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionRegistry
Set-CMTSStepInstallApplication
-TaskSequenceId <String>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionRegistry
Set-CMTSStepInstallApplication
-TaskSequenceName <String>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionOperatingSystem
Set-CMTSStepInstallApplication
-TaskSequenceId <String>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionOperatingSystem
Set-CMTSStepInstallApplication
-TaskSequenceName <String>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
Use this cmdlet to configure an instance of the Install Application task sequence step.
For more information on this step, see About task sequence steps: Install Application.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1
This example changes the Install Application step in the Default OS deployment task sequence to install apps according to a dynamic variable list ITApps.
$tsNameOsd = "Default OS deployment"
$tsStepNameInstallApp = "Install Application"
Set-CMTSStepInstallApplication -TaskSequenceName $tsNameOsd -StepName $tsStepNameInstallApp -NewStepName "Install IT apps" -BaseVariableName "ITApps" -ContinueOnInstallError $true -RetryCount 5
Parameters
-AddCondition
Specify a condition object to add to this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | AddConditions |
Parameter sets
-Application
Specify one or more application objects to install. To get this object, use the Get-CMApplication cmdlet.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Applications |
Parameter sets
-BaseVariableName
Use this parameter to install applications according to a dynamic variable list. Then the task sequence installs applications using this base variable name. For more information, see Install applications according to dynamic variable list.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ClearCache
Set this parameter to $true to clear application content from the client cache after installing the app. This behavior is beneficial on devices with small hard drives or when installing lots of large apps in succession.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | RemoveFromCache |
Parameter sets
-ClearCondition
Remove a condition from this step. Use the -Condition parameter to specify the condition to remove.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | ClearConditions |
Parameter sets
-Condition
Specify a condition object to use with this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | SubCondition, SubConditions |
Parameter sets
-ConditionVariableName
Specify the name of the task sequence variable to use as a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Variable |
Parameter sets
-ConditionVariableValue
Specify the value of the task sequence variable to use in a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Value |
Parameter sets
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
-Description
Specify an optional description for this task sequence step.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-EnableContinueOnInstallError
Set this parameter to $true to continue installing other applications in the list if an application fails to install. If you set this parameter to $false, and the installation fails, the step immediately ends.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileDateTimeOperator
Specify a variable operator type for a file date/time condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FilePath
Specify the path for a file condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileTimestamp
Specify a date/time value to use for a file condition.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileVersion
Specify a version string for a file condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderDateTimeOperator
Specify a variable operator for a folder date/time condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderPath
Specify the path for a folder condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderTimestamp
Specify a date/time value to use for a folder condition.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-InputObject
Specify a task sequence object from which to get the Install Application step. To get this object, use the Get-CMTaskSequence cmdlet.
Parameter properties
| Type: | IResultObject |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | TaskSequence |
Parameter sets
-IsAnyVersion
Use this parameter with the SetConditionSoftware parameter to match any version of the product.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-IsContinueOnError
Use this parameter to enable the step option Continue on error. When you enable this option, if the step fails, the task sequence continues.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IsThisStepContinueOnError |
Parameter sets
-IsEnabled
Use this parameter to enable this task sequence step.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IsThisStepEnabled |
Parameter sets
-MoveToIndex
Move this step to the specified index position in the task sequence.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-MsiFilePath
Specify the path to a Windows Installer file for a software condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Namespace
Specify the namespace for a WMI query condition.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-NewStepName
Use this parameter to rename this task sequence step.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-OperatorType
Specify an operator to use with a task sequence variable condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Query
Specify a WMI query string to use for a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryKey
Specify the key to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryOperator
Specify an operator to use with a registry condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryValueData
Specify the value data to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryValueName
Specify the value name to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionFile
Use this parameter to remove a file condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionFolder
Use this parameter to remove a folder condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionIfStatement
Use this parameter to remove an if statement condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionOperatingSystem
Use this parameter to remove an OS condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionQueryWmi
Use this parameter to remove a WMI query condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionRegistry
Use this parameter to remove a registry condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionSoftware
Use this parameter to remove a software condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionVariable
Use this parameter to remove a task sequence variable condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RetryCount
If one of the application installations unexpectedly restarts the computer, retry this step for the number of times that you specify with this parameter. By default, the step retries twice. Specify an integer value from 1 to 5.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RootKey
Specify the root key to use with a registry condition.
Parameter properties
| Type: | RegistryRootKeyType |
| Default value: | None |
| Accepted values: | HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionFile
Add a new file condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionFolder
Add a new folder condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionIfStatement
Add a new if statement condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionOperatingSystem
Add a new OS condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionQueryWmi
Add a new WMI query condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionRegistry
Add a new registry condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionSoftware
Add a new software condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionVariable
Add a new task sequence variable condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-StatementType
Set the type for an if statement condition.
Parameter properties
| Type: | ConditionStatementType |
| Default value: | None |
| Accepted values: | All, Any, None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Operator |
Parameter sets
-StepName
Specify the name of the step to select for changes.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-StepOrder
Use this parameter to reorder the step in the task sequence.
Parameter properties
| Type: | ReorderType |
| Default value: | None |
| Accepted values: | MoveUp, MoveDown, MoveToIndex |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SupportedPlatform
Use this parameter to specify the platforms for an OS condition.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | SupportedPlatforms |
Parameter sets
-TaskSequenceId
Specify the package ID of the task sequence from which to get the Install Application step. This value is a standard package ID, for example XYZ00858.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Id, TaskSequencePackageId |
Parameter sets
-TaskSequenceName
Specify the name of the task sequence to target for changes.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ValueType
Specify the type of value for a registry condition.
Parameter properties
| Type: | RegistryValueType |
| Default value: | None |
| Accepted values: | RegistrySZ, RegistryExpandSZ, RegistryDWord |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-VersionOperator
Specify an operator to use with a file condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
System.Object
Related Links
Feedback
Was this page helpful?