Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
Set-CMTSStepRunCommandLine
- Module:
- ConfigurationManager Module
Configure an instance of the Run Command Line task sequence step.
Syntax
ByValue (Default)
Set-CMTSStepRunCommandLine
-InputObject <IResultObject>
[-CommandLine <String>]
[-IsRunAsUser <Boolean>]
[-IsWow64RedirectionEnabled <Boolean>]
[-OutputVariableName <String>]
[-PackageId <String>]
[-SuccessCode <Int32[]>]
[-Timeout <Int32>]
[-UserName <String>]
[-UserPassword <SecureString>]
[-WorkingDirectory <String>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ById
Set-CMTSStepRunCommandLine
-TaskSequenceId <String>
[-CommandLine <String>]
[-IsRunAsUser <Boolean>]
[-IsWow64RedirectionEnabled <Boolean>]
[-OutputVariableName <String>]
[-PackageId <String>]
[-SuccessCode <Int32[]>]
[-Timeout <Int32>]
[-UserName <String>]
[-UserPassword <SecureString>]
[-WorkingDirectory <String>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByName
Set-CMTSStepRunCommandLine
-TaskSequenceName <String>
[-CommandLine <String>]
[-IsRunAsUser <Boolean>]
[-IsWow64RedirectionEnabled <Boolean>]
[-OutputVariableName <String>]
[-PackageId <String>]
[-SuccessCode <Int32[]>]
[-Timeout <Int32>]
[-UserName <String>]
[-UserPassword <SecureString>]
[-WorkingDirectory <String>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionIfStatement
Set-CMTSStepRunCommandLine
-TaskSequenceId <String>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionIfStatement
Set-CMTSStepRunCommandLine
-TaskSequenceName <String>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionIfStatement
Set-CMTSStepRunCommandLine
-InputObject <IResultObject>
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionVariable
Set-CMTSStepRunCommandLine
-TaskSequenceId <String>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionVariable
Set-CMTSStepRunCommandLine
-TaskSequenceName <String>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionVariable
Set-CMTSStepRunCommandLine
-InputObject <IResultObject>
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionFile
Set-CMTSStepRunCommandLine
-TaskSequenceId <String>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionFile
Set-CMTSStepRunCommandLine
-TaskSequenceName <String>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionFile
Set-CMTSStepRunCommandLine
-InputObject <IResultObject>
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionFolder
Set-CMTSStepRunCommandLine
-TaskSequenceId <String>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionFolder
Set-CMTSStepRunCommandLine
-TaskSequenceName <String>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionFolder
Set-CMTSStepRunCommandLine
-InputObject <IResultObject>
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionQueryWmi
Set-CMTSStepRunCommandLine
-InputObject <IResultObject>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionOperatingSystem
Set-CMTSStepRunCommandLine
-InputObject <IResultObject>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionRegistry
Set-CMTSStepRunCommandLine
-InputObject <IResultObject>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByValueSetConditionSoftware
Set-CMTSStepRunCommandLine
-InputObject <IResultObject>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionSoftware
Set-CMTSStepRunCommandLine
-TaskSequenceId <String>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionSoftware
Set-CMTSStepRunCommandLine
-TaskSequenceName <String>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionQueryWmi
Set-CMTSStepRunCommandLine
-TaskSequenceId <String>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionQueryWmi
Set-CMTSStepRunCommandLine
-TaskSequenceName <String>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionRegistry
Set-CMTSStepRunCommandLine
-TaskSequenceId <String>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionRegistry
Set-CMTSStepRunCommandLine
-TaskSequenceName <String>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByIdSetConditionOperatingSystem
Set-CMTSStepRunCommandLine
-TaskSequenceId <String>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByNameSetConditionOperatingSystem
Set-CMTSStepRunCommandLine
-TaskSequenceName <String>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
Use this cmdlet to configure an instance of the Run Command Line task sequence step.
For more information on this step, see About task sequence steps: Run Command Line.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1
This example changes the Run Command Line step in the Default OS deployment task sequence to timeout after 30 minutes and start in the C:\Contoso working directory.
$tsNameOsd = "Default OS deployment"
$tsStepNameRunCmd = "Run Command Line"
Set-CMTSStepRunCommandLine -TaskSequenceName $tsNameOsd -StepName $tsStepNameRunCmd -Timeout 30 -WorkingDirectory "C:\Contoso"
Parameters
-AddCondition
Specify a condition object to add to this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | AddConditions |
Parameter sets
-ClearCondition
Remove a condition from this step. Use the -Condition parameter to specify the condition to remove.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | ClearConditions |
Parameter sets
-CommandLine
Specify the command line that the task sequence runs. Include file name extensions, for example, .exe. Include all required settings files and command-line options.
For example: cmd.exe /c copy Jan98.dat c:\sales\Jan98.dat
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Condition
Specify a condition object to use with this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | SubCondition, SubConditions |
Parameter sets
-ConditionVariableName
Specify the name of the task sequence variable to use as a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Variable |
Parameter sets
-ConditionVariableValue
Specify the value of the task sequence variable to use in a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Value |
Parameter sets
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
-Description
Specify an optional description for this task sequence step.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileDateTimeOperator
Specify a variable operator type for a file date/time condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FilePath
Specify the path for a file condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileTimestamp
Specify a date/time value to use for a file condition.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FileVersion
Specify a version string for a file condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderDateTimeOperator
Specify a variable operator for a folder date/time condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderPath
Specify the path for a folder condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-FolderTimestamp
Specify a date/time value to use for a folder condition.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-InputObject
Specify a task sequence object from which to get the Run Command Line step. To get this object, use the Get-CMTaskSequence cmdlet.
Parameter properties
| Type: | IResultObject |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | TaskSequence |
Parameter sets
-IsAnyVersion
Use this parameter with the SetConditionSoftware parameter to match any version of the product.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-IsContinueOnError
Use this parameter to enable the step option Continue on error. When you enable this option, if the step fails, the task sequence continues.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IsThisStepContinueOnError |
Parameter sets
-IsEnabled
Use this parameter to enable this task sequence step.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IsThisStepEnabled |
Parameter sets
-IsRunAsUser
Set this parameter to $true to run the command line as a Windows user account and not the local system account. Then use the UserName and UserPassword parameters.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-IsWow64RedirectionEnabled
By default, 64-bit operating systems use the WOW64 file system redirector to run command lines. This behavior is to properly find 32-bit versions of OS executables and libraries. Set this parameter to $false to disable the use of the WOW64 file system redirector. Windows runs the command using native 64-bit versions of OS executables and libraries. This option has no effect when running on a 32-bit OS.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IsEnabledRedirectionFor64BitFileSystem |
Parameter sets
-MoveToIndex
Move this step to the specified index position in the task sequence.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-MsiFilePath
Specify the path to a Windows Installer file for a software condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Namespace
Specify the namespace for a WMI query condition.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-NewStepName
Use this parameter to rename this task sequence step.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-OperatorType
Specify an operator to use with a task sequence variable condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-OutputVariableName
Specify the name of a custom task sequence variable. When you use this parameter, the step saves the last 1000 characters of the command output to the variable.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Output, OutputVariable |
Parameter sets
-PackageId
When you specify files or programs on the command line that don't already exist on the destination computer, use this parameter to specify the package ID for a package that has the necessary files. The package doesn't require a program. If the specified files exist on the destination computer, this option isn't required.
This value is a standard package ID, for example XYZ00821.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Query
Specify a WMI query string to use for a condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryKey
Specify the key to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryOperator
Specify an operator to use with a registry condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryValueData
Specify the value data to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RegistryValueName
Specify the value name to use with a registry condition.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionFile
Use this parameter to remove a file condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionFolder
Use this parameter to remove a folder condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionIfStatement
Use this parameter to remove an if statement condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionOperatingSystem
Use this parameter to remove an OS condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionQueryWmi
Use this parameter to remove a WMI query condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionRegistry
Use this parameter to remove a registry condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionSoftware
Use this parameter to remove a software condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemoveConditionVariable
Use this parameter to remove a task sequence variable condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RootKey
Specify the root key to use with a registry condition.
Parameter properties
| Type: | RegistryRootKeyType |
| Default value: | None |
| Accepted values: | HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionFile
Add a new file condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionFolder
Add a new folder condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionIfStatement
Add a new if statement condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionOperatingSystem
Add a new OS condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionQueryWmi
Add a new WMI query condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionRegistry
Add a new registry condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionSoftware
Add a new software condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SetConditionVariable
Add a new task sequence variable condition.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-StatementType
Set the type for an if statement condition.
Parameter properties
| Type: | ConditionStatementType |
| Default value: | None |
| Accepted values: | All, Any, None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Operator |
Parameter sets
-StepName
Specify the name of the step to select for changes.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-StepOrder
Use this parameter to reorder the step in the task sequence.
Parameter properties
| Type: | ReorderType |
| Default value: | None |
| Accepted values: | MoveUp, MoveDown, MoveToIndex |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-SuccessCode
Specify an array of integer values as exit codes from the command that the step should evaluate as success.
Parameter properties
| Type: | Int32[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | SuccessCodes |
Parameter sets
-SupportedPlatform
Use this parameter to specify the platforms for an OS condition.
Parameter properties
| Type: | IResultObject[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | SupportedPlatforms |
Parameter sets
-TaskSequenceId
Specify the package ID of the task sequence from which to get the Run Command Line step. This value is a standard package ID, for example XYZ00858.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Id, TaskSequencePackageId |
Parameter sets
-TaskSequenceName
Specify the name of the task sequence to target for changes.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Timeout
Specify an integer value that represents how long Configuration Manager allows the command line to run. This value can be from 1 minute to 999 minutes. The default value is 15 minutes.
If you enter a value that doesn't allow enough time for the specified command to complete successfully, this step fails. The entire task sequence could fail depending on step or group conditions. If the timeout expires, Configuration Manager terminates the command-line process.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | TimeoutInMinutes |
Parameter sets
-UserName
When you use the IsRunAsUser parameter, use this parameter to specify the name of the Windows user account. To specify the account password, use the UserPassword parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-UserPassword
When you use the IsRunAsUser parameter, use this parameter to specify the password of the account that you specify with UserName.
Parameter properties
| Type: | SecureString |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ValueType
Specify the type of value for a registry condition.
Parameter properties
| Type: | RegistryValueType |
| Default value: | None |
| Accepted values: | RegistrySZ, RegistryExpandSZ, RegistryDWord |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-VersionOperator
Specify an operator to use with a file condition.
Parameter properties
| Type: | VariableOperatorType |
| Default value: | None |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
-WorkingDirectory
Specify the folder in which the command starts. This path can be up to 127 characters.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | StartIn |
Parameter sets
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
System.Object
Related Links
Feedback
Was this page helpful?