Note

Access to this page requires authorization. You can try signing in or .

Access to this page requires authorization. You can try .

KINTERRUPT_POLARITY enumeration (wdm.h)

The KINTERRUPT_POLARITY enumeration indicates how a device signals an interrupt request on an interrupt line.

Syntax

typedef enum _KINTERRUPT_POLARITY {
 InterruptPolarityUnknown,
 InterruptActiveHigh,
 InterruptRisingEdge,
 InterruptActiveLow,
 InterruptFallingEdge,
 InterruptActiveBoth,
 InterruptActiveBothTriggerLow,
 InterruptActiveBothTriggerHigh
} KINTERRUPT_POLARITY, *PKINTERRUPT_POLARITY;

Constants

 
InterruptPolarityUnknown
The interrupt polarity is unknown.
InterruptActiveHigh
Active-high interrupt. The interrupt input type is level-triggered, and an interrupt request is indicated by a high signal level on the interrupt line. The request remains active as long as the line remains high.
InterruptRisingEdge
Rising-edge-triggered interrupt. The interrupt input type is edge-triggered, and an interrupt request is indicated by a low-to-high transition on the interrupt line.
InterruptActiveLow
Active-low interrupt. The interrupt input type is level-triggered, and an interrupt request is indicated by a low signal level on the interrupt line. The request remains active as long as the line remains low.
InterruptFallingEdge
Falling-edge-triggered interrupt. The interrupt input type is edge-triggered, and an interrupt request is indicated by a high-to-low transition on the interrupt line.
InterruptActiveBoth
Active-both interrupt. The interrupt input type is edge-triggered, and an interrupt request is indicated by a low-to-high or a high-to-low transition on the interrupt line. After a low-to-high transition signals an interrupt request, the interrupt line remains high until a high-to-low transition signals the next interrupt request. Similarly, after a high-to-low transition signals an interrupt request, the interrupt line remains low until a low-to-high transition signals the next interrupt request.
InterruptActiveBothTriggerLow
Reserved for use by the operating system.
InterruptActiveBothTriggerHigh
Reserved for use by the operating system.

Remarks

A KINTERRUPT_POLARITY enumeration constant is frequently used in conjunction with a KINTERRUPT_MODE enumeration constant to describe an interrupt signal. A KINTERRUPT_MODE enumeration constant indicates whether the interrupt signal from a device is level-triggered or edge-triggered.

Requirements

Requirement Value
Header wdm.h (include Wdm.h, Ntddk.h, Ntifs.h, Miniport.h)

See also

KINTERRUPT_MODE

Feedback

Was this page helpful?

Additional resources

  • Last updated on