Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
STORAGE_PROTOCOL_COMMAND structure (winioctl.h)
This structure is used as an input buffer when using the pass-through mechanism to issue a vendor-specific command to a storage device (via IOCTL_STORAGE_PROTOCOL_COMMAND).
Syntax
typedef struct _STORAGE_PROTOCOL_COMMAND {
DWORD Version;
DWORD Length;
STORAGE_PROTOCOL_TYPE ProtocolType;
DWORD Flags;
DWORD ReturnStatus;
DWORD ErrorCode;
DWORD CommandLength;
DWORD ErrorInfoLength;
DWORD DataToDeviceTransferLength;
DWORD DataFromDeviceTransferLength;
DWORD TimeOutValue;
DWORD ErrorInfoOffset;
DWORD DataToDeviceBufferOffset;
DWORD DataFromDeviceBufferOffset;
DWORD CommandSpecific;
DWORD Reserved0;
DWORD FixedProtocolReturnData;
DWORD FixedProtocolReturnData2;
DWORD Reserved1[2];
BYTE Command[ANYSIZE_ARRAY];
} STORAGE_PROTOCOL_COMMAND, *PSTORAGE_PROTOCOL_COMMAND;
Members
Version
The version of this structure. This should be set to STORAGE_PROTOCOL_STRUCTURE_VERSION.
Length
The size of this structure. This should be set to sizeof(STORAGE_PROTOCOL_COMMAND).
ProtocolType
The protocol type, of type STORAGE_PROTOCOL_TYPE.
Flags
Flags set for this request. The following are valid flags.
| Flag | Description |
|---|---|
| STORAGE_PROTOCOL_COMMAND_FLAG_ADAPTER_REQUEST | This flag indicates the request to target an adapter instead of device. |
ReturnStatus
The status of the request made to the storage device. In Windows 10, possible values include:
| Status value | Description |
|---|---|
| STORAGE_PROTOCOL_STATUS_PENDING | The request is pending. |
| STORAGE_PROTOCOL_STATUS_SUCCESS | The request has completed successfully. |
| STORAGE_PROTOCOL_STATUS_ERROR | The request has encountered an error. |
| STORAGE_PROTOCOL_STATUS_INVALID_REQUEST | The request is not valid. |
| STORAGE_PROTOCOL_STATUS_NO_DEVICE | A device is not available to make a request to. |
| STORAGE_PROTOCOL_STATUS_BUSY | The device is busy acting on the request. |
| STORAGE_PROTOCOL_STATUS_DATA_OVERRUN | The device encountered a data overrun while acting on the request. |
| STORAGE_PROTOCOL_STATUS_INSUFFICIENT_RESOURCES | The device cannot complete the request due to insufficient resources. |
| STORAGE_PROTOCOL_STATUS_NOT_SUPPORTED | The request is not supported. |
ErrorCode
The error code for this request. This is optionally set.
CommandLength
The length of the command. A non-zero value must be set by the caller.
ErrorInfoLength
The length of the error buffer. This is optionally set and can be set to 0.
DataToDeviceTransferLength
The size of the buffer that is to be transferred to the device. This is only used with a WRITE request.
DataFromDeviceTransferLength
The size of the buffer this is to be transferred from the device. This is only used with a READ request.
TimeOutValue
How long to wait for the device until timing out. This is set in units of seconds.
ErrorInfoOffset
The offset of the error buffer. This must be pointer-aligned.
DataToDeviceBufferOffset
The offset of the buffer that is to be transferred to the device. This must be pointer-aligned and is only used with a WRITE request.
DataFromDeviceBufferOffset
The offset of the buffer that is to be transferred from the device. This must be pointer-aligned and is only used with a READ request.
CommandSpecific
Command-specific data passed along with the command. This depends on the command from the driver, and is optionally set.
Reserved0
Reserved for future use.
FixedProtocolReturnData
The return data. This is optionally set. Some protocols such as NVMe, may return a small amount of data (DWORD0 from completion queue entry) without the need of a separate device data transfer.
FixedProtocolReturnData2
Reserved1[2]
Reserved for future use.
Command[ANYSIZE_ARRAY]
The vendor-specific command that is to be passed-through to the device.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 10 |
| Minimum supported server | Windows Server 2016 |
| Header | winioctl.h (include Windows.h) |
See also
Feedback
Was this page helpful?