👁 Image
This article or section does not follow the Laptop page guidelines.
Reason: Hardware table misses some items, the hardware ID for the Wi-Fi card is erroneous, misses accessibility, firmware and function keys sections. (Discuss in Talk:Acer Swift 1 SF114-34)
| Hardware | PCI/USB ID | Working? |
|---|---|---|
| Wi-Fi | 00:14.3 |
Yes |
| Bluetooth | 8087:0026 |
Yes |
| Webcam | 0408:a094 |
Yes |
| Fingerprint Sensor | 1c7a:0575 |
No |
Information about the Acer Swift 1 SF114-34.
Installation
Press F2 on boot to enter the BIOS. Set a supervisor password under the Security tab and then disable Secure Boot under the Boot tab. You can now remove the supervisor password.
Tip Enable F12 Boot Menu in the Advanced tab to make it easier to switch boot devices.
Fingerprint sensor
libfprint does not support the model.
Suspension
Suspension does not work, device wakes up immediately.
👁 Image
This article or section needs expansion.
Reason: More testing needed (Discuss in Talk:Acer Swift 1 SF114-34)
Find a "RP" device with enabled status (usually RP05) with the following command:
$ cat /proc/acpi/wakeup
This is what is causing the issue, and you will need to disable it. Create:
/etc/systemd/system/fix-suspension.service
[Unit] Description=Disable devices as wakeup [Service] ExecStart=sh -c "echo device_name > /proc/acpi/wakeup" Type=oneshot [Install] WantedBy=multi-user.target
Enable/start it and suspension should now work properly.