4CoreDual-SATA2_R2.0.conf

# lm-sensors configuration for ASRock 4CoreDual-SATA2 R2.0
# copied from ASRock K7VT2 by Marcus Roeckrath from
# archive of lm-sensors.org wiki and slightly tweaked

chip "w83697hf-*"

 label in0 "VCore"
 label in2 "+3.3V"
 label in3 "+5V"
 label in4 "+12V"
 label in5 "-12V"
 label in6 "-5V"
 label in7 "V5SB"
 label in8 "VBat"

 compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
 compute in4 ((28/10)+1)*@ , @/((28/10)+1)
 # These are the compute lines for -12V and -5V from the
 # sample config file sensors.conf.eg from the lm-sensors
 # source archive.
 # But these lines give positive values on the K7VT2 board.
 # compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14
 # compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14
 # Therefor I use the compute lines for the positive
 # voltages for the negative voltages also and added a "-"
 # to get plausible negative values.
 compute in5 -((28/10)+1)*@ , -@/((28/10)+1)
 compute in6 -((6.8/10)+1)*@ , -@/((6.8/10)+1)
 compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)

 set in0_min 1.3 * 0.95
 set in0_max 1.3 * 1.05
 set in2_min 3.3 * 0.95
 set in2_max 3.3 * 1.05
 set in3_min 5 * 0.95
 set in3_max 5 * 1.05
 set in4_min 12 * 0.95
 set in4_max 12 * 1.05
 set in5_min -12 * 0.9
 set in5_max -12 * 1.1
 set in6_min -5 * 0.9
 set in6_max -5 * 1.1
 set in7_min 5 * 0.85
 set in7_max 5 * 1.15
 set in8_min 3.0 * 0.8
 set in8_max 3.0 * 1.2

 label temp1 "System Temp"
 label temp2 "CPU Temp"

 set temp1_max 50
 set temp1_max_hyst 45
 set temp2_max 52
 set temp2_max_hyst 47

 label fan1 "Chassis Fan"
 label fan2 "CPU Fan"

 set fan1_div 4
 set fan1_min 0
 # with fancontrol
 set fan2_div 8
 set fan2_min 680
 # without fancontrol
# set fan2_div 2
# set fan2_min 3000