Reverse Address Resolution Protocol - RARP

Reverse Address Resolution Protocol (RARP) is a network protocol that allows a device to discover its IP address when only its MAC (Media Access Control) address is known. It was designed for systems such as diskless workstations, which do not have permanent storage to save their IP addresses. These devices boot from ROM and must request their IP address dynamically from a RARP server on the local network.

Note: RARP was standardized in RFC 903 (1984) but is now considered obsolete, replaced by more flexible protocols like BOOTP and DHCP.

Components of RARP

1. IP Address Assignment: Normally, a machine stores its IP address in a configuration file. Diskless systems cannot do this and rely on RARP for IP assignment.
2. Physical Address: Every network device has a unique MAC address, stored in its Network Interface Card (NIC).
3. RARP Request: A device broadcasts a request containing its MAC address to ask for the corresponding IP address.
4. RARP Server: The server maintains a mapping of MAC addresses to IP addresses. On receiving a request, it replies with the correct IP address.

Working of RARP

Reverse ARP (RARP) is a network protocol used by a client machine in a local area network (LAN) to obtain its Internet Protocol (IP) address from the gateway router's ARP (Address Resolution Protocol) table. When a machine doesn't have the memory to store its IP address, such as diskless machines or newly configured systems, it uses RARP to request an IP address.

1. RARP Request: A client broadcasts a RARP request containing its MAC address.
2. Server Lookup: A RARP server (or gateway router with ARP table) checks its mapping of MAC -> IP.
3. RARP Reply: If a match is found, the server responds with the client’s IP address.
4. Client Configuration: The client configures itself with the provided IP and can now communicate on the network.

RARP Packet Format & Encapsulation

Packet Format: The format of the RARP packet is identical to the ARP packet format. The key difference lies in the Operation field.

• For a RARP Request message, the value of the Operation field is 3.
• For a RARP Reply message, the value of the Operation field is 4.

Encapsulation: RARP packets are encapsulated directly into data-link layer frames (e.g., Ethernet frames) so they can be transmitted over the LAN.

Difference Between RARP and ARP

Is RARP Obsolete?

Yes. RARP is obsolete and rarely used in modern networks because of its limitations. It has been replaced by:

1. BOOTP (Bootstrap Protocol): Provides IP along with gateway, DNS and configuration.
2. DHCP (Dynamic Host Configuration Protocol): Extension of BOOTP, most widely used today for dynamic IP assignment and full configuration support.

Issues in RARP

• Limited scalability
• Lack of security
• No subnetting support
• Router incompatibility
• Compatibility issues with modern networks

Pros of RARP

• Simplifies configuration for diskless machines.
• Automatic IP assignment reduces manual errors.
• Prevents conflicts by uniquely mapping MAC to IP.
• Legacy support for older devices.