VOOZH about

URL: https://www.rfc-editor.org/info/rfc660/

⇱ RFC 660: Some changes to the IMP and the IMP/Host interface | RFC Editor


Details

Date published
Authors
Legacy Stream
DOI
https://doi.org/10.17487/RFC0660
Formats
Cite this RFC
TXT, XML, BibTeX.

RFC 660: Some changes to the IMP and the IMP/Host interface

  • D.C. Walden
Unknown
Network Working Group D. Walden (BBN-NET)
Request for Comments: 660 Oct 1974
NIC #31202


 SOME CHANGES TO THE IMP AND THE IMP/HOST INTERFACE

In the next few weeks several changes will be made to the IMP
software including changes to the IMP/Host software interface
as specified in BBN Report No. 1822, Specifications for the
Interconnection of a Host and an IMP. These changes come in
four areas: a) decoupling of the message number sequences of
Hosts; b) Host/Host access control; c) expansion of the
message number window from four to eight; and d) provision for
messages outside the normal message number mechanism. All changes
are backward compatible with possible minor exceptions in timing.

a. Decoupling of the Host/Host message number sequences:
 Since 1972 the IMP system has provided for exactly four
 messages to be outstanding at a time between any pair of
 IMPs, and thus, a total of only four messages between
 all the possible pairs of Hosts on the two IMPs. Because
 all the pairs of Hosts on the two IMPs have had to share
 the four outstanding messages, it has been quite possible
 for the various Hosts to interfere with each other. To
 remove this possibility of interference, the IMP's
 message number logic will soon be changed to allow a
 separate message number sequence between each pair of Hosts.

 To keep manageable the space required to maintain the
 Host/Host message sequences above that presently are required
 for the IMP/IMP message sequences, the Host/Host sequences
 will be taken dynamically from a limited pool of possible
 sequences. The pool will be sufficiently large to seldom
 interfere with a pair of Hosts wishing to communicate. In
 no case will Hosts be prevented from communicating. In
 the event that the Hosts on an IMP desire to simultaneously
 communicate with so many other Hosts that the pool would
 be exhausted, the space in the pool is quickly multiplexed
 in time among all the desired Host/Host conversations
 so that none is stopped although all are possibly slowed.

b. Host/Host access control:
 Upon instructions from ARPA, we will soon add a Host/Host
 access control mechanism to the IMPs. Any pair of Hosts
 wishing to communicate is checked (via bits in the IMP)
 to verify that they have administrative permission to
 communicate. This check normally is made whenever a pair
 of Hosts attempts to communicate after not having
 communicated for two minutes. If the pair of Hosts is
 not allowed to communicate, a special type of Destination
 Dead Message (sub-code 3) is returned to the source
 Host. The default case initially will be to allow all
 Hosts to communicate with each other.



 -1-

c. Message number window.:
 Once the message number sequences are on a Host/Host
 rather than IMP/IMP basis, the number of messages that
 will be permitted to be outstanding at a time between
 a pair of Hosts will be expanded from four to eight,
 permitting increased Host/Host throughput in some cases.

d. Message outside the normal mechanism:.
 For certain limited experiments which are being carried on
 using the network, it is thought to be desirable
 for specified Hosts to be able to communicate outside the
 normal ordered, error controlled message sequences.
 Thus, the following expansion to the IMP/Host protocol is being
 provided.

i. a single packet message coming from the source Host
 to the source IMP with a (new) special message type,
 3, will be put directly into the IMP store-and-forward
 logic with a mark saying the packet is this special
 kind of message. A multi-packet message of type 3
 will be discarded.

ii. such messages (packets) are routed normally to the
 destination IMP, possibly arriving out of order.

iii. at the destination IMP, messages of the special
 type will be put directly on the destination Host
 output queue skipping the reassembly logic and marked
 with a special (new) IMP to Host message type, also 3.

iv. there is no source-to-destination retransmission
 logic, no reassembly, no RFNMs, no incomplete
 transmissions, etc.

v. if at any time there are insufficient resources in the
 network to handle one of these special messages
 (e.g., the destination Host won't take it), the
 message will be discarded.

vi. by using the special message type between the Host
 and the IMP, the normal message number mechanism is
 preserved for all the Host/Host transmissions which
 presently depend on it.

Because the uncontrolled use of this mechanism will degrade the
performance of the network for all users, the set of Hosts permitted
to use this mechanism will be regulated by the Network Control
Center.

Please file this note with your copy of BBN Report 1822 until
that document is updated.



 -2-
RFC 660: Some changes to the IMP and the IMP/Host interface
Unknown