RFC 1097: Telnet subliminal-message option

Network Working Group B. Miller
Request for Comments: 1097 CMU-NetDev
 1 April 1989

 TELNET SUBLIMINAL-MESSAGE Option

Status of this Memo

 This RFC specifies a standard for the Internet community. Hosts on
 the Internet that display subliminal messages within the Telnet
 protocol are expected to adopt and implement this standard.
 Distribution of this memo is unlimited.

1. Command name and code.

 SUBLIMINAL-MESSAGE 257

2. Command meanings.

 IAC WILL SUBLIMINAL-MESSAGE

 The sender of this command REQUESTS permission to, or confirms
 that it will, display subliminal messages.

 IAC WONT SUBLIMINAL-MESSAGE

 The sender of this command REFUSES to display subliminal messages.

 IAC DO SUBLIMINAL-MESSAGE

 The sender of this command REQUESTS that the receiver, or grants
 the receiver permission to, display subliminal messages.

 IAC DONT SUBLIMINAL-MESSAGE

 The sender of this command DEMANDS that the receiver not display
 subliminal messages.

 IAC SB SUBLIMINAL-MESSAGE <16-bit value> <16-bit value> <string> IAC
 SE

 The sender specifies a message to be subliminaly displayed by the
 remote host. If the client has agreed (via the standard WILL WONT
 DO DONT mechanism) to display subliminal messages, it must accept
 this subnegotiation and attempt to display the message string on
 the users console for the specified duration and continue to do so
 at fixed intervals until another SUBLIMINAL-MESSAGE subnegotiation
 is received. The position and rendering of the message of



Miller [Page 1]

---

RFC 1097 SUBLIMINAL 1 April 1989


 implementation dependent.

 The first 16-bit value specifies the duration of the message in
 milliseconds. It is sent MSB first. The second 16-bit value
 specifies the frequency with which the message is displayed. It
 represents the number of seconds between displays and is also sent
 MSB first. The final parameter is the message itself.

 The syntax for this subnegotiation is:

 IAC SB SUBLIMINAL-MESSAGE
 DURATION[1] DURATION[0]
 FREQUENCY[1] FREQUENCY[0]
 MESSAGE_STRING
 IAC SE

 As required by the Telnet protocol, any occurence of 255 in the
 subnegotiation must be doubled to destinguish it from the IAC
 character (which has a value of 255).

3. Default.

 WONT SUBLIMINAL-MESSAGE

 DONT SUBLIMINAL-MESSAGE

 i.e., subliminal messages will not be displayed.

4. Motivation for the option

 Frequently the use of "Message of the day" banners and newsletters is
 insufficient to convince stubborn users to upgrade to the latest
 version of telnet. Some users will use the same outdated version for
 years. I ran across this problem trying to convince people to use
 the REMOTE-FLOW-CONTROL Telnet option. These users need to be gently
 "persuaded".

5. Description and implementation notes.

 The quality of the client implementation will depend on it's ability
 to display and erase text strings in a small amount of time. The
 current implementation at CMU takes into acount terminal line speed,
 advanced video capabilities, and screen phospher persistance when
 calculating how long to wait before erasing a message.

 While it is permitted for the client to display the message text
 "in-line", best results at obtained by printing the message at the
 top or side of console screen where it will just catch the corner of



Miller [Page 2]

---

RFC 1097 SUBLIMINAL 1 April 1989


 the user's visual field.

 A version is currently under development at CMU to display the
 message using morse-code over the keyboard caps-lock LED.

6. Examples

 In the following example all numbers are in decimal notation.

 1. Server suggests and client agrees to use SUBLIMINAL-MESSAGE.

 (Server sends) IAC DO SUBLIMINAL-MESSAGE
 (Client sends) IAC WILL SUBLIMINAL-MESSAGE
 (Server sends) IAC SB SUBLIMINAL-MESSAGE 0 5 0 20 "Use VMS" IAC SE

 [The server is "suggesting" that the user employ a stable
 operating system, not an unreasonable request...]

 The client should immediately begin displaying the message and
 should continue to do so at regular intervals.

 2. Server preempts previous subliminal message.

 (Server sends) IAC SB SUBLIMINAL-MESSAGE 0 5 0 20 "Go home" IAC SE

 The client should now no longer display the previous message and
 should immediately begin displaying the new one.

 3. Server has messed with user enough for one day.

 (Server sends) IAC SB SUBLIMINAL-MESSAGE 0 0 0 0 "" IAC SE

 The client must cease display of any subliminal messages.

7. Acknowledgements.

 We do things just a little sneakier here at CMU.














Miller [Page 3]

RFC 1097: Telnet subliminal-message option