VOOZH about

URL: https://www.rfc-editor.org/rfc/rfc927.html


Network Working Group Brian A. Anderson
Request for Comments: 927 BBN
 December 1984

 TACACS User Identification Telnet Option


Status of this Memo

 This RFC suggests a proposed protocol for the ARPA-Internet
 community, and requests discussion and suggestions for improvements.
 Distribution of this memo is unlimited.

Introduction

 The following is the description of a TELNET option designed to
 facilitate double login avoidance. It is intended primarily for TAC
 connections to target hosts on behalf of TAC users, but it can be
 used between any two consenting hosts. For example, all hosts at one
 site (e.g., BBN) can use this option to avoid double login when
 TELNETing to one another.

1. Command name and code

 TUID 26

2. Command Meanings

 IAC WILL TUID

 The sender (the TELNET user) proposes to authenticate the user and
 send the identifing UUID; or, the sender (the TELNET user) agrees
 to authenticate the user on whose behalf the connection is
 initiated.

 IAC WON'T TUID

 The sender (the TELNET user) refuses to authenticate the user on
 whose behalf the connection is initiated.

 IAC DO TUID

 The sender (the TELNET server) proposes that the recipient (the
 TELNET user) authenticate the user and send the identifing UUID;
 or, the sender (the TELNET server) agrees to accept the
 recipient's (the TELNET user's) authentication of the user
 identified by his UUID.






Anderson [Page 1]

RFC 927 December 1984
TUID Telnet Option


 IAC DON'T TUID

 The sender (the TELNET server) refuses to accept the recipient's
 (the TELNET user) authentication of the user.

 IAC SB TUID <uuid> IAC SE

 The sender (the TELNET user) sends the UUID <uuid> of the user on
 whose behalf the connection is established to the host to which he
 is connected. The <uuid> is a 32 bit binary number.

3. Default

 WON'T TUID

 A TELNET user host (the initiator of a TELNET connection) not
 implementing or using the TUID option will reply WON'T TUID to a
 DO TUID.

 DON'T TUID

 A TELNET server host (the recipient of a TELNET connection) not
 implementing or using the TUID option reply DON'T TUID to a WILL
 TUID.

4. Motivation for the Option

 Under TACACS (the TAC Access Control System) a user must be
 authenticated (give a correct name/password pair) to a TAC before he
 can connect to a host via the TAC. To avoid a second authentication
 by the target host, the TAC can pass along the user's proven identity
 (his UUID) to the that host. Hosts may accept the TAC's
 authentication of the user or not, at their option.

 The same option can be used between any pair of cooperating hosts for
 the purpose of double login avoidance.

5. Description for the Option

 At the time that a host establishes a TELNET connection for a user to
 another host, if the latter supports the TUID option and wants to
 receive the user's UUID, it sends an IAC DO TUID to the the user's
 host. If the user's host supports the TUID option and wants to
 authenticate the user by sending the user's UUID, it responds IAC
 WILL TUID; otherwise it responds with IAC WON'T TUID. If both the
 user and server TELNETs agree, the user TELNET will then send the
 UUID to the server TELNET by sub-negotiation.


Anderson [Page 2]

RFC 927 December 1984
TUID Telnet Option


6. Examples

 There are two possible negotiations that result in the double login
 avoidance authentication of a user. Both the server and the user
 TELNET support the TUID option.

 S = Server, U = User

 Case 1:

 S-> IAC DO TUID
 U-> IAC WILL TUID
 U-> IAC SB TUID <32-bit UUID> IAC SE

 Case 2:

 U-> IAC WILL TUID
 S-> IAC DO TUID
 U-> IAC SB TUID <32-bit UUID> IAC SE

 There are also two possible negoitiations that do not result in the
 authentication of a user. In the first example the server supports
 TUID and the user TELNET doesn't. In the second example the user
 TELNET supports TUID but the server TELNET doesn't.

 S = Server, U = User

 Case 3:

 S-> IAC DO TUID
 U-> IAC WONT TUID

 Case 4:

 U-> IAC WILL TUID
 S-> IAC DONT TUID

 The TUID is transmitted with the subnegotiation command. For
 example, if the UUID had the value 1 the following string of octets
 would be transmitted:

 IAC SB TUID 0 0 0 1 IAC SE

 If the UUID had the value 255 the following string of octets would be
 transmitted:

 IAC SB TUID 0 0 0 IAC IAC IAC SE


Anderson [Page 3]

RFC 927 December 1984
TUID Telnet Option


 If the UUID had the value of all ones the following string of octets
 would be transmitted:

 IAC SB TUID IAC IAC IAC IAC IAC IAC IAC IAC IAC SE













































Anderson [Page 4]