Note
Access to this page requires authorization. You can try signing in or .
Access to this page requires authorization. You can try .
Update-MgBetaPolicyAdminConsentRequestPolicy
Update the properties of an adminConsentRequestPolicy object.
Note
To view the v1.0 release of this cmdlet, view Update-MgPolicyAdminConsentRequestPolicy
Syntax
UpdateExpanded (Default)
Update-MgBetaPolicyAdminConsentRequestPolicy
[-ResponseHeadersVariable <string>]
[-AdditionalProperties <hashtable>]
[-Id <string>]
[-IsEnabled]
[-NotifyReviewers]
[-RemindersEnabled]
[-RequestDurationInDays <int>]
[-Reviewers <IMicrosoftGraphAccessReviewReviewerScope[]>]
[-Version <int>]
[-Break]
[-Headers <IDictionary>]
[-HttpPipelineAppend <SendAsyncStep[]>]
[-HttpPipelinePrepend <SendAsyncStep[]>]
[-Proxy <uri>]
[-ProxyCredential <pscredential>]
[-ProxyUseDefaultCredentials]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Update
Update-MgBetaPolicyAdminConsentRequestPolicy
-BodyParameter <IMicrosoftGraphAdminConsentRequestPolicy>
[-ResponseHeadersVariable <string>]
[-Break]
[-Headers <IDictionary>]
[-HttpPipelineAppend <SendAsyncStep[]>]
[-HttpPipelinePrepend <SendAsyncStep[]>]
[-Proxy <uri>]
[-ProxyCredential <pscredential>]
[-ProxyUseDefaultCredentials]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Parameters
-AdditionalProperties
Additional Parameters
Parameter properties
| Type: | System.Collections.Hashtable |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-BodyParameter
adminConsentRequestPolicy To construct, see NOTES section for BODYPARAMETER properties and create a hash table.
Parameter properties
| Type: | Microsoft.Graph.Beta.PowerShell.Models.IMicrosoftGraphAdminConsentRequestPolicy |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Break
Wait for .NET debugger to attach
Parameter properties
| Type: | System.Management.Automation.SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | System.Management.Automation.SwitchParameter |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
-Headers
Optional headers that will be added to the request.
Parameter properties
| Type: | System.Collections.IDictionary |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-HttpPipelineAppend
SendAsync Pipeline Steps to be appended to the front of the pipeline
Parameter properties
| Type: | Microsoft.Graph.Beta.PowerShell.Runtime.SendAsyncStep[] |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-HttpPipelinePrepend
SendAsync Pipeline Steps to be prepended to the front of the pipeline
Parameter properties
| Type: | Microsoft.Graph.Beta.PowerShell.Runtime.SendAsyncStep[] |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Id
The unique identifier for an entity. Read-only.
Parameter properties
| Type: | System.String |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-IsEnabled
Specifies whether the admin consent request feature is enabled or disabled. Required.
Parameter properties
| Type: | System.Management.Automation.SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-NotifyReviewers
Specifies whether reviewers will receive notifications. Required.
Parameter properties
| Type: | System.Management.Automation.SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Proxy
The URI for the proxy server to use
Parameter properties
| Type: | System.Uri |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ProxyCredential
Credentials for a proxy server to use for the remote call
Parameter properties
| Type: | System.Management.Automation.PSCredential |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ProxyUseDefaultCredentials
Use the default credentials for the proxy
Parameter properties
| Type: | System.Management.Automation.SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RemindersEnabled
Specifies whether reviewers will receive reminder emails. Required.
Parameter properties
| Type: | System.Management.Automation.SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-RequestDurationInDays
Specifies the duration the request is active before it automatically expires if no decision is applied.
Parameter properties
| Type: | System.Int32 |
| Default value: | 0 |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-ResponseHeadersVariable
Optional Response Headers Variable.
Parameter properties
| Type: | System.String |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | RHV |
Parameter sets
-Reviewers
Required. To construct, see NOTES section for REVIEWERS properties and create a hash table.
Parameter properties
| Type: | Microsoft.Graph.Beta.PowerShell.Models.IMicrosoftGraphAccessReviewReviewerScope[] |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-Version
Specifies the version of this policy. When the policy is updated, this version is updated. Read-only.
Parameter properties
| Type: | System.Int32 |
| Default value: | 0 |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
-WhatIf
Runs the command in a mode that only reports what would happen without performing the actions.
Parameter properties
| Type: | System.Management.Automation.SwitchParameter |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Microsoft.Graph.Beta.PowerShell.Models.IMicrosoftGraphAdminConsentRequestPolicy
{{ Fill in the Description }}
System.Collections.IDictionary
{{ Fill in the Description }}
Outputs
Microsoft.Graph.Beta.PowerShell.Models.IMicrosoftGraphAdminConsentRequestPolicy
{{ Fill in the Description }}
Notes
COMPLEX PARAMETER PROPERTIES
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
BODYPARAMETER <IMicrosoftGraphAdminConsentRequestPolicy>: adminConsentRequestPolicy
[(Any) <Object>]: This indicates any property can be added to this object.
[Id <String>]: The unique identifier for an entity.
Read-only.
[IsEnabled <Boolean?>]: Specifies whether the admin consent request feature is enabled or disabled.
Required.
[NotifyReviewers <Boolean?>]: Specifies whether reviewers will receive notifications.
Required.
[RemindersEnabled <Boolean?>]: Specifies whether reviewers will receive reminder emails.
Required.
[RequestDurationInDays <Int32?>]: Specifies the duration the request is active before it automatically expires if no decision is applied.
[Reviewers <IMicrosoftGraphAccessReviewReviewerScope[]>]: Required.
[Query <String>]: The query specifying who will be the reviewer.
[QueryRoot <String>]: In the scenario where reviewers need to be specified dynamically, this property is used to indicate the relative source of the query.
This property is only required if a relative query, for example, ./manager, is specified.
Possible value: decisions.
[QueryType <String>]: The type of query.
Examples include MicrosoftGraph and ARM.
[ReviewerId <String>]:
[ScopeType <String>]: accessReviewReviewerScopeType
[Version <Int32?>]: Specifies the version of this policy.
When the policy is updated, this version is updated.
Read-only.
REVIEWERS <IMicrosoftGraphAccessReviewReviewerScope[]>: Required. [Query <String>]: The query specifying who will be the reviewer. [QueryRoot <String>]: In the scenario where reviewers need to be specified dynamically, this property is used to indicate the relative source of the query. This property is only required if a relative query, for example, ./manager, is specified. Possible value: decisions. [QueryType <String>]: The type of query. Examples include MicrosoftGraph and ARM. [ReviewerId <String>]: [ScopeType <String>]: accessReviewReviewerScopeType