Build MVC Applications with Connectivity to AlloyDB Data

In this article, we will guide you through the process of utilizing wizards within Visual Studio to seamlessly integrate the CData ADO.NET Provider for AlloyDB into a basic MVC (Model, View, Controller) project.

Create the Entity Framework Model

Follow the steps below to save connection properties and map tables to entities in the data model.

1. Create a new MVC project in Visual Studio. In this example, the project name is MvcAlloyDBApp.

2. If you are using Entity Framework 6, you will need to take the preliminary step of registering the AlloyDB Entity Framework provider for your project. See the "LINQ and Entity Framework" chapter in the help documentation for a guide.

   Note that MVC 3 scaffolding and MVC 4 scaffolding do not support Entity Framework 6. You can use your scaffolding with Entity Framework 6 by upgrading to the latest version of MVC.
3. To add the .edmx file from the designer, right-click your Models folder and click Add New Item. Select ADO.NET Entity Data Model, name the model, and click Add. In this example, the name of the model is AlloyDBModel.
4. In the Entity Data Model wizard, select the option 'EF Designer from database'. The Entity Data Model wizard is displayed.
5. Click New Connection. Select CData AlloyDB Data Source in the dialog that is displayed.

6. Specify the required connection string properties.

   The following connection properties are usually required in order to connect to AlloyDB.

   • Server: The host name or IP of the server hosting the AlloyDB database.
   • User: The user which will be used to authenticate with the AlloyDB server.
   • Password: The password which will be used to authenticate with the AlloyDB server.

   You can also optionally set the following:

   • Database: The database to connect to when connecting to the AlloyDB Server. If this is not set, the user's default database will be used.
   • Port: The port of the server hosting the AlloyDB database. This property is set to 5432 by default.

   Authenticating with Standard Authentication

   Standard authentication (using the user/password combination supplied earlier) is the default form of authentication.

   No further action is required to leverage Standard Authentication to connect.

   Authenticating with pg_hba.conf Auth Schemes

   There are additional methods of authentication available which must be enabled in the pg_hba.conf file on the AlloyDB server.

   Find instructions about authentication setup on the AlloyDB Server here.

   Authenticating with MD5 Authentication

   This authentication method must be enabled by setting the auth-method in the pg_hba.conf file to md5.

   Authenticating with SASL Authentication

   This authentication method must be enabled by setting the auth-method in the pg_hba.conf file to scram-sha-256.

   Authenticating with Kerberos

   The authentication with Kerberos is initiated by AlloyDB Server when the ∏ is trying to connect to it. You should set up Kerberos on the AlloyDB Server to activate this authentication method. Once you have Kerberos authentication set up on the AlloyDB Server, see the Kerberos section of the help documentation for details on how to authenticate with Kerberos.

   A typical connection string is below:

   User=alloydb;Password=admin;Database=alloydb;Server=127.0.0.1;Port=5432

   👁 The connection for the model. (QuickBooks is shown.)
   

7. Name the connection and select whether to include sensitive information, such as connection credentials, in the connection string. For simplicity, this example saves sensitive information in Web.config. The connection settings are saved as AlloyDBEntities.

   👁 The completed connection step in the ADO.NET Entity Data Model wizard. (A QuickBooks connection is shown.)
   
8. Select the tables and views you need. In this example, Orders is imported. Also, the option to pluralize object names is deselected in this example. Click Finish to create the .edmx file.👁 Tables to be imported into the .edmx file. (QuickBooks is shown.)
   
9. Build your project to complete this step.

Scaffold the Controller and Views

Once you've established the model and completed the project build, you can employ ASP.NET Scaffolding wizards to generate both the controller and the views.

1. In Solution Explorer, right-click the controllers folder and click Add -> Controller. Select MVC 5 Controller with views, using Entity Framework.
2. In the Add Controller dialog that is then displayed, select the following options:
   • Model class: Select a table you imported; for example, Orders.
   • Data context class: Select your context class.
3. Leave the default values for the other fields. 👁 Creating a new controller from an existing entity data model in the Add Controller dialog in MVC 5. (QuickBooks is shown.)
   

You can now access the list of Orders records at http://MySite/Orders. Next to each record are links to edit, delete, and see more information. You can also create new Orders records. With every state change the site picks up any data changes. 👁 The live table. (QuickBooks is shown.)