Build AlloyDB-Connected Apps in Bubble

Bubble is a no-code platform that simplifies the process of developing and launching apps and businesses. When coupled with CData Connect AI, you gain effortless no-code access to AlloyDB data for streamlined app development. This article guides you through the integration process from Bubble to AlloyDB using CData Connect AI.

CData Connect AI provides a pure cloud-to-cloud OData interface for AlloyDB data that allows you to integrate from Bubble to AlloyDB data in real time.

Connect to AlloyDB from Bubble

To work with AlloyDB data from Bubble, we need to connect to AlloyDB from Connect AI, provide user access to the connection, and create a Workspace for the AlloyDB data.

Connect to AlloyDB from Connect AI

CData Connect AI uses a straightforward, point-and-click interface to connect to data sources.

1. Log into Connect AI, click Sources, and then click Add Connection
👁 Adding a Connection

2. Select "AlloyDB" from the Add Connection panel
👁 Selecting a data source

3. Enter the necessary authentication properties to connect to AlloyDB.

   The following connection properties are usually required in order to connect to AlloyDB.

   • Server: The host name or IP of the server hosting the AlloyDB database.
   • User: The user which will be used to authenticate with the AlloyDB server.
   • Password: The password which will be used to authenticate with the AlloyDB server.

   You can also optionally set the following:

   • Database: The database to connect to when connecting to the AlloyDB Server. If this is not set, the user's default database will be used.
   • Port: The port of the server hosting the AlloyDB database. This property is set to 5432 by default.

   Authenticating with Standard Authentication

   Standard authentication (using the user/password combination supplied earlier) is the default form of authentication.

   No further action is required to leverage Standard Authentication to connect.

   Authenticating with pg_hba.conf Auth Schemes

   There are additional methods of authentication available which must be enabled in the pg_hba.conf file on the AlloyDB server.

   Find instructions about authentication setup on the AlloyDB Server here.

   Authenticating with MD5 Authentication

   This authentication method must be enabled by setting the auth-method in the pg_hba.conf file to md5.

   Authenticating with SASL Authentication

   This authentication method must be enabled by setting the auth-method in the pg_hba.conf file to scram-sha-256.

   Authenticating with Kerberos

   The authentication with Kerberos is initiated by AlloyDB Server when the ∏ is trying to connect to it. You should set up Kerberos on the AlloyDB Server to activate this authentication method. Once you have Kerberos authentication set up on the AlloyDB Server, see the Kerberos section of the help documentation for details on how to authenticate with Kerberos. 👁 Configuring a connection (Salesforce is shown)
   

4. Click Save & Test
5. Navigate to the Permissions tab in the Add AlloyDB Connection page and update the User-based permissions. 👁 Updating permissions
   

Add a Personal Access Token

When connecting to Connect AI through the REST API, the OData API, or the Virtual SQL Server, a Personal Access Token (PAT) is used to authenticate the connection to Connect AI. It is best practice to create a separate PAT for each service to maintain granularity of access.

1. Click on the Gear icon () at the top right of the Connect AI app to open the settings page.
2. On the Settings page, go to the Access Tokens section and click Create PAT.
3. Give the PAT a name and click Create. 👁 Creating a new PAT
   
4. The personal access token is only visible at creation, so be sure to copy it and store it securely for future use.

Configure AlloyDB Endpoints for Bubble

After connecting to AlloyDB, create a workspace for your desired table(s).

1. Navigate to the Workspaces page and click Add to create a new Workspace (or select an existing workspace). 👁 The Workspaces page.
   👁 Adding a new Workspace.
   
2. Click Add to add new assets to the Workspace.
3. Select the AlloyDB connection (e.g. AlloyDB1) and click Next. 👁 Selecting an Asset (Salesforce is shown).
   
4. Select the table(s) you wish to work with and click Confirm. 👁 Selecting Tables (Salesforce is shown).
   
5. Make note of the OData Service URL for your workspace, e.g. https://cloud.cdata.com/api/odata/{workspace_name}

With the connection, PAT, and Workspace configured, you are ready to connect to AlloyDB data from Bubble.

Build a AlloyDB-Connected App

With OData endpoints added to Connect AI, you can build an app in Bubble with live access to AlloyDB data.

Configure the Bubble API Connector

To start, Configure the API Connector for accessing CData Connect AI from Bubble.

1. In your app, click the Plugins tab and click Add plugins
2. Search for "API Connector" and click Install 👁 Installing the API Connector plugin
   
3. After installation, click the "Add another API" button and configure the API:
   • Name the API
   • Set Authentication to "HTTP Basic Auth"
   • Set Username to a Connect AI user (e.g. [email protected])
   • Set Password to the PAT for the user
   • Expand the API Call, select the "GET" command and set the URL to a Workspace endpoint you previously configured (e.g. https://cloud.cdata.com/api/odata/{workspace_name}/Orders)
   👁 Configuring the API Call
   
4. Click the "Initialize call" button to adjust data types in the response (as needed) 👁 Initializing the call
   
5. After making any necessary changes, click "Save" 👁 Saving the data types
   

Configure the App UI

With the API Connector configure, you are ready to retrieve AlloyDB data in your Bubble app. In this article, we request the data with a UI component that can display an Excel-like table.

1. On the Plugin tab, install the "Excel-like HandsonTable" 👁 Adding the Excel-like HandsonTable plugin
   
2. On the Design tab, add an "Excel Table" to the workspace 👁 Adding an Excel Table to the app
   
3. In the Excel Table, in Data source, select "Get data from an external API"
4. Set Type of content to "API Call value"
5. Set Data source to "CData Connect AI - API Call's value" (or equivalent) 👁 Binding the Excel Table to the API Call
   
6. Click "Preview" to ensure the data was retrieved from AlloyDB. 👁 Previewing the app
   

At this point, you can develop applications with live access to AlloyDB data without needing to know the complexities of the back-end API.

Live Access to AlloyDB Data from Cloud Applications

Now you have a direct connection to live AlloyDB data from Bubble. You can create more AlloyDB-connected apps — all without writing any code or replicating AlloyDB data.

To get live data access to hundreds of SaaS, Big Data, and NoSQL sources directly from your cloud applications, see the CData Connect AI.