Getting Started with the CData PowerShell Cmdlets for Oracle Eloqua Reporting Data

This guide explains everything you need to get started with the Oracle Eloqua Reporting PowerShell Cmdlets. You'll learn how to install the cmdlets, configure your first connection, run queries, and explore next steps for working with Oracle Eloqua Reporting data in PowerShell.

Installation & Licensing

System Requirements

CData PowerShell Cmdlets run anywhere PowerShell runs.

Windows

• Windows 10/11
• Windows Server 2016+
• PowerShell 5.1 or PowerShell 7+

macOS & Linux

• PowerShell 7+
• No additional system libraries required
• No architecture-specific installers

Installing the Cmdlets

CData Cmdlets are delivered through the PowerShell Gallery, ensuring a simple and consistent installation process across platforms.

Installation Steps

1. Open PowerShell in Administrator mode
2. Run the following command to install the cmdlet module:

   Install-Module OracleEloquaReportingCmdlets -Repository PSGallery -Force

   This command:

   • Downloads the module from the official PowerShell Gallery
   • Installs it into your PowerShell environment
   • Registers all cmdlets for immediate use

Module Verification

To verify installation:

Get-Module -ListAvailable "*OracleEloquaReporting*"

Licensing

The cmdlets support both trial and fully licensed activation.

Trial Licensing

Trial activation is automatic - no key is required. Once installed, you can begin using the cmdlets immediately.

Activating a Full License

If you have purchased a full license, you will receive a product key from the CData Orders Team.

Activate Your License

Run the following command:

Set-ModuleLicense ""

You should see a confirmation message indicating successful activation.

Common Licensing Questions

Can I use my license on multiple machines?

Depending on your subscription tier. Refer to your order confirmation or contact [email protected].

I lost my license key. What do I do?

Email [email protected] with your order number to have it resent.

Can I transfer my license to another machine?

Submit a license transfer request here: https://www.cdata.com/lic/transfer/.

Where can I manage my license?

Visit the CData Customer Portal: https://portal.cdata.com/.

Connection Configuration

Once the module is installed and licensed, you can establish a connection to Oracle Eloqua Reporting using the

Connect-Oracle Eloqua Reporting cmdlet

After obtaining the needed connection properties, accessing Oracle Eloqua Reporting data in PowerShell and preparing for replication consists of four basic steps.

Oracle Eloqua Reporting supports the following authentication methods:

• Basic authentication (User and Password)
• OAuth 2.0 code grant flow
• OAuth 2.0 password grant flow

Basic Authentication (User and Password)

To perform authentication with a user and password, specify these properties:

• AuthScheme: Basic.
• Company: The company name associated with your Oracle Eloqua Reporting account.
• User: Your login account name.
• Password: Your login password.

OAuth Authentication (Code Grant Flow)

To authenticate with the OAuth code grant flow, you must set AuthScheme to OAuth and create a custom OAuth application. For information about how to create a custom OAuth application, see the Help documentation.

Then set the following properties:

• InitiateOAuth: GETANDREFRESH. Used to automatically get and refresh the OAuthAccessToken.
• OAuthClientId: The client Id assigned when you registered your application.
• OAuthClientSecret: The client secret that was assigned when you registered your application.
• CallbackURL: The redirect URI that was defined when you registered your application.

When you connect, the driver opens Oracle Eloqua Reporting's OAuth endpoint in your default browser. Log in and grant permissions to the application. When the access token expires, the driver refreshes it automatically.

OAuth Authentication (Password Grant Flow)

With the OAuth password grant flow, you can use your OAuth application's credentials alongside your user credentials to authenticate without the need to grant permission manually via a browser prompt. You must create an OAuth app (see the Help documentation) to use this authentication method.

Set the following properties:

• AuthScheme: OAuthPassword
• Company: The company's unique identifier.
• User: Your login account name.
• Password: Your login password.
• OAuthClientId: The client Id assigned when you registered your custom OAuth application.
• OAuthClientSecret: The client secret assigned when you registered your custom OAuth application.

Collecting Oracle Eloqua Reporting Data

1. Install the module:

   Install-Module OracleEloquaReportingCmdlets

2. Connect to Oracle Eloqua Reporting:

    $oracleeloquareporting = Connect-OracleEloquaReporting -AuthScheme $AuthScheme -User $User -Password $Password -Company $Company
    

Querying Oracle Eloqua Reporting Data in PowerShell

Once connected, you can query data using standard SQL like commands.

Example Query:

$results = Select-OracleEloquaReporting `
 -Connection $conn `
 -Table "" `
 -Columns "," `
 -Where " != ''"

Display the results:

$results

You have now successfully accessed Oracle Eloqua Reporting data from PowerShell!

Common Issues

Authentication Failed

Solution: Verify username, password, and security token. For OAuth applications, you may need to authorize CData in your application's security settings. Contact [email protected] for authorization assistance.

Network or Proxy Issues

Solution: Confirm firewall settings and outbound access. Most cloud applications use port 443.

Cmdlet Not Found

Solution: Ensure the module is installed-

Get-Module -ListAvailable "*Oracle Eloqua Reporting*"

Slow Queries

Solution:

• Add filters to reduce dataset size
• Use $Limit or $Top properties where supported
• Contact [email protected] for optimization help

For additional connection troubleshooting, contact [email protected] with your specific error message.

What's Next?

Now that you have installed, licensed, and configured the PowerShell Cmdlets, here are some scenarios you can use to explore:

Get Support

If you need assistance:

• Technical Support: [email protected]
• Community Forum: CData Community Site
• Help Documentation: Installed locally and available online

FAQs (PowerShell Cmdlets)

Installation & Licensing

• Do I need administrator rights to install the cmdlets?

Not always.

• Windows PowerShell 5.1 (Windows): Administrator rights are recommended, especially when installing modules for all users.
• PowerShell 7+ (Windows, macOS, Linux): You can install cmdlets for the current user without admin rights using:

  Install-Module OracleEloquaReportingCmdlets -Scope CurrentUser

• Do I need to download an installer?

CData PowerShell Cmdlets are delivered through the PowerShell Gallery. Installation is performed via:

Install-Module OracleEloquaReportingCmdlets -Repository PSGallery -Force

Connecting

• How do I connect to multiple accounts for the same data source?

Create separate connection objects-each with different authentication properties:

$conn1 = Connect-OracleEloquaReporting -User User1 -Password Pwd1

$conn2 = Connect-OracleEloquaReporting -User User2 -Password Pwd2

• Does PowerShell Cmdlets require a DSN?

Cmdlets do not use ODBC DSNs. All connection properties are passed directly in

Connect-Oracle Eloqua Reporting

• Can I connect through a proxy server?

Many cmdlets support proxy properties such as:

• ProxyServer
• ProxyPort
• ProxyUser
• ProxyPassword

Refer to the data-source-specific Help documentation.

Performance & Troubleshooting

• Why are my queries slow?

Common causes:

• Missing filters (e.g., no WHERE clause)
• Pulling large result sets
• Latency from cloud APIs
• Not using incremental strategies

Try:

• Filtering data (-Where parameter)
• Selecting only required columns
• Reviewing API throttling limits for your data source

Contact [email protected] for query optimization assistance.

• How do I enable logging?

Enable module logging with:

Set-ModuleLogging -Path "C:\logs\cdata.log" -Verbosity 3

Upload the log file securely when working with CData Support.
• What ports need to be open?

Most cloud applications (Salesforce, HubSpot, Dynamics, Google APIs, etc.) use: HTTPS (443)

If your source requires additional ports, check its specific documentation or contact [email protected].

• Can I use the cmdlets in containers (Docker, Kubernetes)?

Install PowerShell 7 in the container and install the module:

pwsh -Command "Install-Module OracleEloquaReportingCmdlets -Force"

Then authenticate normally.

General

• Where can I find all supported SQL/command operations?

Each cmdlet includes a Help documentation set installed locally and available online: https://www.cdata.com/powershell/.

• How often are PowerShell Cmdlets updated?

CData releases major annual updates plus incremental updates throughout the year. Check your customer portal or contact [email protected] for version availability.

• Where can I find code examples?

Every Cmdlet includes examples in the Help documentation, plus online examples for many services: https://www.cdata.com/powershell/. Examples include:

• Basic queries
• Insert/update/delete
• OAuth flows
• File operations
• API integration

For questions not covered in this FAQ, [email protected].