Work with IBM Cloud Object Storage Data in FoxPro

The CData ODBC driver for IBM Cloud Object Storage enables you to access IBM Cloud Object Storage data using the ODBC standard. You can use the CData ODBC Driver for IBM Cloud Object Storage to integrate IBM Cloud Object Storage data into your FoxPro project. The procedure below provides a walk-through of the included code sample, which saves IBM Cloud Object Storage data into tables in a FoxPro database.

Connect to IBM Cloud Object Storage as an ODBC Data Source

If you have not already, first specify connection properties in an ODBC DSN (data source name). This is the last step of the driver installation. You can use the Microsoft ODBC Data Source Administrator to create and configure ODBC DSNs.

NOTE: Set the 'Map To WVarchar' connection property to FALSE (FoxPro uses the ODBC W API and returns the WCHAR for the value type).

Register a New Instance of Cloud Object Storage

If you do not already have Cloud Object Storage in your IBM Cloud account, follow the procedure below to install an instance of SQL Query in your account:

1. Log in to your IBM Cloud account.
2. Navigate to the

Connecting using OAuth Authentication

There are certain connection properties you need to set before you can connect. You can obtain these as follows:

API Key

To connect with IBM Cloud Object Storage, you need an API Key. You can obtain this as follows:

1. Log in to your IBM Cloud account.
2. Navigate to the Platform API Keys page.
3. On the middle-right corner click "Create an IBM Cloud API Key" to create a new API Key.
4. In the pop-up window, specify the API Key name and click "Create". Note the API Key as you can never access it again from the dashboard.

Cloud Object Storage CRN

If you have multiple accounts, specify the CloudObjectStorageCRN explicitly. To find the appropriate value, you can:

• Query the Services view. This will list your IBM Cloud Object Storage instances along with the CRN for each.
• Locate the CRN directly in IBM Cloud. To do so, navigate to your IBM Cloud Dashboard. In the Resource List, Under Storage, select your Cloud Object Storage resource to get its CRN.

Connecting to Data

You can now set the following to connect to data:

• InitiateOAuth: Set this to GETANDREFRESH. You can use InitiateOAuth to avoid repeating the OAuth exchange and manually setting the OAuthAccessToken.
• ApiKey: Set this to your API key which was noted during setup.
• CloudObjectStorageCRN (Optional): Set this to the cloud object storage CRN you want to work with. While the connector attempts to retrieve this automatically, specifying this explicitly is recommended if you have more than Cloud Object Storage account.

When you connect, the connector completes the OAuth process.

1. Extracts the access token and authenticates requests.
2. Saves OAuth values in OAuthSettingsLocation to be persisted across connections.

Connect and Transfer

To get started, add the code sample to a new project. You can execute the following command to save all tables without displaying them:

DO C:\Temp\sqldump.prg WITH "CData IBMCloudObjectStorage Source", "TESTDB", .f.

Below is the process that the program follows:

1. Create a new FoxPro database.

2. Open a connection to IBM Cloud Object Storage data with the line below:

   m.hSQLconnection = SQLCONNECT(m.cODBCDSN)
   

3. If the connection was successful, you can now retrieve the list of tables using the SQLTABLES function. The code below saves the list of tables in sys_tables.dbf:

   WAIT WINDOW "Fetching tables for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR
   m.nSQLTABLES = SQLTABLES(m.hSQLconnection)
   
   IF lUseDistinctConnections
    WAIT WINDOW "Closing ODBC Connection for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR
    SQLDISCONNECT(m.hSQLconnection)
    m.hSQLconnection = 0 * SQLCONNECT needs to be called again
   ENDIF
   
   IF m.nSQLTABLES > 0
    * create local table containing list of tables in db
    COPY TO (m.cImportData + "sys_tables")
    USE
   
    * convert each table to DBF
    USE (m.cImportData + "sys_tables")
    ALTER TABLE DBF("sys_tables") ;
    ADD COLUMN records i ;
    ADD COLUMN dbfname m
   

4. Scan over each table, saving it to a DBF file. The function ODBCtoDBF stores the table in a DBF file and then opens a grid if the lBrowse parameter is set to true:

   FUNCTION ODBCtoDBF (cTableName as String, cTableType as String, lBrowse as Logical, lhSQLConnection as Integer)
   
    WAIT WINDOW ;
    "Converting " + m.cTableType + ' "' + m.cTableName + '" to DBF...' ;
    NOWAIT NOCLEAR
   
    ACTIVATE SCREEN
   
    * strip characters incompatible with FoxPro out of the name of the DBF file
    m.cTableAlias		= ""
    m.nTableNameLen		= LEN(m.cTableName)
    m.nTableNameStart	= 1
    
    FOR m.nTableNameStart = 1 TO m.nTableNameLen
    m.cCharacter = SUBSTR(m.cTableName, m.nTableNameStart, 1)	
    IF !ISALPHA(m.cCharacter) .and. (m.nTableNameStart = 1 .or. !ISDIGIT(m.cCharacter))
    m.cTableAlias = m.cTableAlias + "_"
    ELSE
    m.cTableAlias = m.cTableAlias + m.cCharacter
    ENDIF
    ENDFOR
   
    m.cFromTable = m.cTableName
    m.cTempViewAlias	= m.cTableType + "_" + m.cTableAlias
   
    LOCAL loException as Exception
    LOCAL lnResultSets
    
    TRY
    * run query
    m.lnResultSets = SQLEXEC(m.lhSQLConnection, ;
    "SELECT * FROM " + m.cFromTable, ;
    m.cTempViewAlias, ;
    aSQLResult)
   	 
    IF m.lnResultSets#1
    SET STEP ON
    ENDIF
   	
    ACTIVATE SCREEN
   
    CATCH TO m.loException
    ACTIVATE SCREEN
    ? "Error opening " + m.cTempViewAlias + ":"
    ? m.loException.Message
    ? m.loException.Details
    ENDTRY
   
    IF !USED(m.cTempViewAlias)
    RETURN
    ENDIF
   
    * copy records from view cursor to disk
    SELECT * FROM (m.cTempViewAlias) ;
    INTO TABLE (m.cImportData + m.cTableAlias)
   
    IF USED(m.cTableAlias)
   
    ACTIVATE SCREEN
   
    FLUSH	&& flush the buffer to write the data to disk
   
    IF m.lBrowse
    * pop the table up on screen
    SELECT (m.cTableAlias)
    BROWSE NORMAL NOMODIFY NOWAIT
    ACTIVATE SCREEN
    ELSE
    * close on-disk table for now
    USE IN (m.cTableAlias)
    ACTIVATE SCREEN
    ENDIF
    ENDIF
   
    IF USED(m.cTempViewAlias)
    USE IN &cTempViewAlias && close SQL view
    ACTIVATE SCREEN
    ENDIF
   
    WAIT CLEAR
   
   ENDFUNC
   

5. You can now save tables of IBM Cloud Object Storage data as DBF files.

Below is the full code, in FoxPro 9 syntax:

PARAMETERS cODBCDSN, cDatabaseName, lBrowseAfterConvert

*	cODBCDSN				The ODBC data source name, used for the name of the folder where the DBF tables are stored.
*	cDatabaseName			The name of the FoxPro database to use. This database is created if it does not exist. The default is DATABASE_NAME.
*								
*	lBrowseAfterConvert		If ".t." display each table with the BROWSE command after importing it. If ".f." close each table before moving on to the next one.

#define		ODBC_DATASOURCE		"DataSourceName"
#define		DATABASE_NAME		"odbcdata"

m.m_tpath = ".\" && root directory for data

ON ERROR
SET SAFETY OFF

IF VARTYPE(m.cODBCDSN)#"C" .or. EMPTY(m.cODBCDSN)
 m.cODBCDSN = ODBC_DATASOURCE
ENDIF
IF VARTYPE(m.cDatabaseName)#"C" .or. EMPTY(m.cDatabaseName)
 m.cDatabaseName = DATABASE_NAME
ENDIF

m.cImportData = m.cODBCDSN + "\"

CLOSE TABLES ALL
CLOSE DATABASES ALL

IF !DIRECTORY(m.cImportData)
	MKDIR (m.cImportData)
ENDIF

CREATE DATABASE (m.cDatabaseName)
CREATE CONNECTION (m.cDatabaseName) DATASOURCE (m.cODBCDSN) DATABASE (m.cDatabaseName)

WAIT WINDOW "Opening ODBC Connection for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR
m.hSQLconnection = SQLCONNECT(m.cODBCDSN)

IF m.hSQLconnection > 0
 * Connection successful; get list of tables
 WAIT WINDOW "Fetching tables for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR
 m.nSQLTABLES = SQLTABLES(m.hSQLconnection)

 IF m.nSQLTABLES > 0
 * Create local table containing list of tables in db
 COPY TO (m.cImportData + "sys_tables")
 USE

 * Convert each table to DBF
 USE (m.cImportData + "sys_tables")
 ALTER TABLE DBF("sys_tables") ;
 ADD COLUMN records	i ;
 ADD COLUMN dbfname	m

 SCAN	
 m.cCurrentTable	= TRIM(sys_tables.table_name)
 m.cCurrentTableType	= TRIM(sys_tables.table_type) && Valid values are "SYSTEMTABLE", "TABLE", and "VIEW".
 IF m.cCurrentTableType = "TABLE" or m.cCurrentTableType = "VIEW"

 ODBCtoDBF(m.cCurrentTable, m.cCurrentTableType, m.lBrowseAfterConvert, m.hSQLConnection)
 ELSE
 ACTIVATE SCREEN
 ? "ERROR:", m.cCurrentTable, "Couldn't open ODBC connection."
 =MESSAGEBOX("couldn't open data source " + m.cODBCDSN + " for table " + m.cCurrentTable + ".")
 ENDIF

 ENDSCAN
 BROWSE NORMAL NOWAIT

 ELSE
 =MESSAGEBOX("No tables found in data source " + m.cODBCDSN + ".")
 SET STEP ON
 ENDIF
 
 SQLDISCONNECT(m.hSQLconnection)
 
ELSE
 =MESSAGEBOX("Could not open data source " + m.cODBCDSN + ".")
 SET STEP ON
ENDIF

FUNCTION ODBCtoDBF (cTableName as String, cTableType as String, lBrowse as Logical, lhSQLConnection as Integer)

 WAIT WINDOW ;
 "Converting " + m.cTableType + ' "' + m.cTableName + '" to DBF...' ;
 NOWAIT NOCLEAR

 ACTIVATE SCREEN

 * Strip characters incompatible with FoxPro out of the name of the DBF file
 m.cTableAlias		= ""
 m.nTableNameLen		= LEN(m.cTableName)
 m.nTableNameStart	= 1
 
 FOR m.nTableNameStart = 1 TO m.nTableNameLen
 m.cCharacter = SUBSTR(m.cTableName, m.nTableNameStart, 1)	
 IF !ISALPHA(m.cCharacter) .and. (m.nTableNameStart = 1 .or. !ISDIGIT(m.cCharacter))
 m.cTableAlias = m.cTableAlias + "_"
 ELSE
 m.cTableAlias = m.cTableAlias + m.cCharacter
 ENDIF
 ENDFOR

 m.cFromTable = m.cTableName
 m.cTempViewAlias	= m.cTableType + "_" + m.cTableAlias

 LOCAL loException as Exception
 LOCAL lnResultSets
 
 TRY
 * Run query
 m.lnResultSets = SQLEXEC(m.lhSQLConnection, ;
 "SELECT * FROM " + m.cFromTable, ;
 m.cTempViewAlias, ;
 aSQLResult)
	 
 IF m.lnResultSets#1
 SET STEP ON
 ENDIF
	
 ACTIVATE SCREEN

 CATCH TO m.loException
 ACTIVATE SCREEN
 ? "Error opening " + m.cTempViewAlias + ":"
 ? m.loException.Message
 ? m.loException.Details
 ENDTRY

 IF !USED(m.cTempViewAlias)
 RETURN
 ENDIF

 * Copy records from view cursor to disk
 SELECT * FROM (m.cTempViewAlias) ;
 INTO TABLE (m.cImportData + m.cTableAlias)

 IF USED(m.cTableAlias)

 ACTIVATE SCREEN

 FLUSH	&& Flush the buffer to write the data to disk

 IF m.lBrowse
 * Display the table on screen
 SELECT (m.cTableAlias)
 BROWSE NORMAL NOMODIFY NOWAIT
 ACTIVATE SCREEN
 ELSE
 * Close on-disk table
 USE IN (m.cTableAlias)
 ACTIVATE SCREEN
 ENDIF
 ENDIF

 IF USED(m.cTempViewAlias)
 USE IN &cTempViewAlias && Close SQL view
 ACTIVATE SCREEN
 ENDIF

 WAIT CLEAR

ENDFUNC