Integrate Cline with Live Monday.com Data via CData Connect AI

Cline is an autonomous AI coding agent that runs inside modern IDEs such as VS Code and Cursor. It enables developers to build agent-driven workflows that can reason through tasks, execute actions, and interact with external systems directly from the editor using a structured execution model.

By integrating Cline with CData Connect AI through the built-in MCP (Model Context Protocol) Server, the agent gains the ability to query, analyze, and act on live Monday.com data in real time. This integration bridges Cline's in-IDE agent framework with the governed enterprise connectivity of CData Connect AI, ensuring all data access runs securely against authorized sources without manual data movement.

This article outlines the steps to configure Monday.com connectivity in Connect AI, generate the required personal access token, register the Connect AI MCP Server in Cline, and verify that the agent can successfully interact with live Monday.com data from within the IDE.

Step 1: Configure Monday.com connectivity for Cline

Connectivity to Monday.com from Cline is made possible through CData Connect AI's Remote MCP Server. To interact with Monday.com data from Cline, start by creating and configuring a Monday.com connection in CData Connect AI.

1. Log into Connect AI, click Sources, and then click Add Connection
👁 Adding a connection in Connect AI

2. Select Monday.com from the Add Connection panel
👁 Selecting data source

3. Enter the necessary authentication properties to connect to Monday.com.

   You can connect to Monday.com using either API Token authentication or OAuth authentication.

   Connecting with an API Token

   Connect to Monday.com by specifying the APIToken. Set the AuthScheme to Token and obtain the APIToken as follows:

   • API tokens for admin users
     1. Log in to your Monday.com account and click on your avatar in the bottom left corner.
     2. Select Admin.
     3. Select "API" on the left side of the Admin page.
     4. Click the "Copy" button to copy the user's API token.
   • API tokens for non-admin users
     1. Click on your profile picture in the bottom left of your screen.
     2. Select "Developers"
     3. Click "Developer" and then "My Access Tokens" at the top.
     4. Select "Show" next to the API token, where you'll be able to copy it.

   Connecting with OAuth Authentication

   Alternatively, you can establish a connection using OAuth (refer to the OAuth section of the Help documentation).

   👁 Configuring a connection (Salesforce is shown)
   
4. Click Save & Test
5. Navigate to the Permissions tab and update user-based permissions
👁 Updating permissions

Add a Personal Access Token

A Personal Access Token (PAT) is used to authenticate the connection to Connect AI from Cline. It is best practice to create a separate PAT for each integration to maintain granular access control.

1. Click the gear icon () at the top right of the Connect AI app to open Settings
2. On the Settings page, go to the Access Tokens section and click Create PAT
3. Give the PAT a descriptive name and click Create
👁 Creating a new PAT

4. Copy the token when displayed and store it securely. It will not be shown again

With the Monday.com connection configured and a PAT generated, Cline can now connect to Monday.com data through the CData Connect Ai.

Step 2: Install and set up Cline

Cline is distributed as an IDE extension and can be installed in environments such as VS Code or Cursor. In this example, Cursor is used, but the steps are identical for supported IDEs.

1. Open Cursor and install the Cline extension from the Extensions Marketplace 👁 Installing the Cline extension in Cursor
   
2. Complete the initial Cline setup flow, including model selection and permission prompts
3. After setup is complete, the Cline agent panel opens automatically inside the IDE

Step 3: Add the Connect AI Remote MCP Server

Once Cline is running, add the CData Connect AI Remote MCP Server so the agent can access live Monday.com data through Connect AI.

1. In the Cline panel, click MCP Servers 👁 Opening MCP Servers in Cline
   
2. Open Remote Servers and click Edit Configuration 👁 Editing remote MCP server configuration
   
3. This opens a JSON configuration file. Paste the configuration below

   {
    "mcpServers": {
    "mcp": {
    "url": "https://mcp.cloud.cdata.com/mcp",
    "type": "streamableHttp",
    "headers": {
    "Authorization": "Basic your_email:your_PAT"
    },
    "disabled": false,
    "autoApprove": []
    }
    }
   }
   

   Note: Cline will use Basic authentication with Connect AI. Combine your Connect AI user email and the PAT you created earlier. For example, [email protected]:ABC123...XYZ789 and add the value for the Authorization header like, Basic [email protected]:ABC123...XYZ789.

   👁 Configuring MCP server
   
4. Save the file and return to the MCP Servers screen to confirm the server is listed and enabled 👁 Configured MCP server listed in Cline
   

Step 4: Query live data from Cline

With the MCP server registered, Cline can now interact with live data sources exposed by Connect AI.

1. Click the icon in the Cline panel to start a New Task/Chat 👁 Starting a new chat in Cline
   
2. At the bottom of the chat window, confirm that the configured MCP server is selected 👁 Selecting the configured MCP server
   
3. Start interacting with the agent by entering prompts such as:
   • List connections
   • Show schemas for a catalog
   • Query recent records from Monday.com data
   👁 Sample output from querying through the MCP server
   

Cline is now fully configured to access and query live Monday.com data through the CData Connect AI Remote MCP Server, enabling real-time, data-driven workflows directly from your IDE.

Get CData Connect AI

To access hundreds of SaaS, Big Data, and NoSQL sources through secure, AI-ready interfaces, try CData Connect AI today.