Build PingOne-Powered Applications in Cursor with CData Code Assist MCP

Cursor is an AI-powered code editor that integrates agentic AI into everyday development workflows. With support for MCP, Cursor can connect to local tools and enterprise data sources directly from the editor, enabling natural language interaction with live systems without switching context.

Model Context Protocol (MCP) is an open standard for connecting LLM clients to external services through structured tool interfaces. MCP servers expose capabilities such as schema discovery and live querying, allowing AI agents to retrieve and reason over real-time data safely and consistently.

In this article, we guide you through installing the CData Code Assist MCP for PingOne, configuring the connection to PingOne, connecting the Code Assist MCP add-on to Cursor, and querying live PingOne data from within the editor.

Step 1: Download and install the CData Code Assist MCP for PingOne

1. To begin, download the CData Code Assist MCP for PingOne 👁 Downloading the CData Code Assist MCP add-on installer
   
2. Find and double-click the installer to begin the installation
3. Run the installer and follow the prompts to complete the installation 👁 Completing the CData Code Assist MCP add-on installation
   

When the installation is complete, you are ready to configure your Code Assist MCP add-on by connecting to PingOne.

Step 2: Configure the connection to PingOne

1. After installation, open the CData Code Assist MCP for PingOne configuration wizard 👁 The CData Code Assist MCP add-on configuration wizard
   

   NOTE: If the wizard does not open automatically, search for "CData Code Assist MCP for PingOne" in the Windows search bar and open the application.

   👁 Opening the CData Code Assist MCP add-on configuration wizard (Google Sheets is shown).
   
2. In MCP Configuration > Configuration Name, either select an existing configuration or choose to create a new one 👁 Creating a new configuration
   
3. Name the configuration (e.g. "cdata_pingone") and click OK 👁 Naming the configuration
   

4. Enter the appropriate connection properties in the configuration wizard

   To connect to PingOne, configure these properties:

   • : The region where the data for your PingOne organization is being hosted.
   • : The type of authentication to use when connecting to PingOne.
   • Either (required when using the default PingOne domain) or , configured as described below.

   Configuring WorkerAppEnvironmentId

   is the ID of the PingOne environment in which your Worker application resides. This parameter is used only when the environment is using the default PingOne domain (auth.pingone). It is configured after you have created the custom OAuth application you will use to authenticate to PingOne, as described in Creating a Custom OAuth Application in the Help documentation.

   First, find the value for this property:

   1. From the home page of your PingOne organization, move to the navigation sidebar and click Environments.
   2. Find the environment in which you have created your custom OAuth/Worker application (usually Administrators), and click Manage Environment. The environment's home page displays.
   3. In the environment's home page navigation sidebar, click Applications.
   4. Find your OAuth or Worker application details in the list.
   5. Copy the value in the Environment ID field. It should look similar to:
      

      WorkerAppEnvironmentId='11e96fc7-aa4d-4a60-8196-9acf91424eca'

   Now set to the value of the Environment ID field.

   Configuring AuthorizationServerURL

   is the base URL of the PingOne authorization server for the environment where your application is located. This property is only used when you have set up a custom domain for the environment, as described in the PingOne platform API documentation. See Custom Domains.

   Authenticating to PingOne with OAuth

   PingOne supports both OAuth and OAuthClient authentication. In addition to performing the configuration steps described above, there are two more steps to complete to support OAuth or OAuthCliet authentication:

   • Create and configure a custom OAuth application, as described in Creating a Custom OAuth Application in the Help documentation.
   • To ensure that the driver can access the entities in Data Model, confirm that you have configured the correct roles for the admin user/worker application you will be using, as described in Administrator Roles in the Help documentation.
   • Set the appropriate properties for the authscheme and authflow of your choice, as described in the following subsections.

   OAuth (Authorization Code grant)

   Set to OAuth.

   Desktop Applications

   Get and Refresh the OAuth Access Token

   After setting the following, you are ready to connect:

   • : GETANDREFRESH. To avoid the need to repeat the OAuth exchange and manually setting the each time you connect, use .
   • : The Client ID you obtained when you created your custom OAuth application.
   • : The Client Secret you obtained when you created your custom OAuth application.
   • : The redirect URI you defined when you registered your custom OAuth application. For example: https://localhost:3333

   When you connect, the driver opens PingOne's OAuth endpoint in your default browser. Log in and grant permissions to the application. The driver then completes the OAuth process:

   1. The driver obtains an access token from PingOne and uses it to request data.
   2. The OAuth values are saved in the location specified in , to be persisted across connections.

   The driver refreshes the access token automatically when it expires.

   For other OAuth methods, including Web Applications, Headless Machines, or Client Credentials Grant, refer to the Help documentation.

   👁 Configuring the Code Assist MCP add-on connection
   
5. Click Connect to authenticate with PingOne through OAuth
6. Then, click Save Configuration to save the Code Assist MCP add-on 👁 Saving the Code Assist MCP add-on configuration
   

This process creates a .mcp configuration file that Cursor will reference when launching the Code Assist MCP add-on. Now with your Code Assist MCP add-on configured, you are ready to connect it to Cursor.

Step 3: Connect the Code Assist MCP add-on to Cursor

1. Download the Cursor desktop application and complete the sign-up flow for your account
2. From the top menu, click Settings to open the settings panel 👁 Opening Cursor Settings
   
3. In the left navigation, open the Tools & MCP tab and click Add Custom MCP 👁 Tools & MCP tab with Add Custom MCP
   

Option 1: Manually add the MCP configuration

1. Cursor opens an mcp.json file in the editor
2. Add the code shown below and save the file

{
 "mcpServers": {
 "cdata-local": {
 "command": "C:/Program Files/Java/jdk-17/bin/java.exe",
 "args": [
 "-jar",
 "C:/Program Files/CData/CData Code Assist MCP for PingOne/lib/cdata.mcp.pingone.jar",
 "cdata_pingone"
 ]
 }
 }
}

👁 Configuring the CData Code Assist MCP add-on in Cursor


NOTE: The command value should point to your Java 17+ java.exe executable, and the JAR path should point to the installed CData Code Assist MCP add-on .jar file. The final argument must match the MCP configuration name you saved in the CData configuration wizard (e.g. "cdata_pingone").

Option 2: Copy the MCP configuration from the CData Code Assist MCP for PingOne UI

1. After saving and testing your connection in the configuration wizard, click Next
👁 Selecting 'Next'

2. Select Cursor from the AI MCP Tool dropdown
👁 Choosing the required AI MCP tool

3. Follow the MCP Client Instructions to create the required folders for the MCP config
👁 MCP configuration instructions

4. Copy the displayed JSON code and paste it into your configuration file
5. In Cursor, open the project folder you created with the mcp.json config
4. The Code Assist MCP add-on should appear as Running under Installed MCP Servers 👁 CData Code Assist MCP add-on running in Cursor
   

Step 4: Query live PingOne data in Cursor

1. From the top bar, click Toggle AI Pane to open the chat window
2. Ask questions about your PingOne data using natural language. For example:

   "List all tables available in my PingOne data connection."

   👁 Querying live data from Cursor
   

Cursor is now fully integrated with CData Code Assist MCP for PingOne and can use the MCP tools exposed to explore schemas and execute live queries against PingOne.

Build with Code Assist MCP. Deploy with CData Drivers.

Download Code Assist MCP for free and give your AI tools schema-aware access to live PingOne data during development. When you're ready to move to production, CData PingOne Drivers deliver the same SQL-based access with enterprise-grade performance, security, and reliability.

Visit the CData Community to share insights, ask questions, and explore what's possible with MCP-powered AI workflows.