VOOZH about

URL: https://www.cdata.com/kb/tech/sapgateway-powershell-setup.rst

⇱ Getting Started with the CData PowerShell Cmdlets for SAP Netweaver Gateway Data

Getting Started with the CData PowerShell Cmdlets for SAP Netweaver Gateway Data

👁 Somya Sharma
Somya Sharma
Technical Marketing Engineer
Complete guide to installing, licensing, and connecting SAP Netweaver Gateway PowerShell Cmdlets.

This guide explains everything you need to get started with the SAP Netweaver Gateway PowerShell Cmdlets. You'll learn how to install the cmdlets, configure your first connection, run queries, and explore next steps for working with SAP Netweaver Gateway data in PowerShell.

Installation & Licensing

System Requirements

CData PowerShell Cmdlets run anywhere PowerShell runs.

Windows

  • Windows 10/11
  • Windows Server 2016+
  • PowerShell 5.1 or PowerShell 7+

macOS & Linux

  • PowerShell 7+
  • No additional system libraries required
  • No architecture-specific installers

Installing the Cmdlets

CData Cmdlets are delivered through the PowerShell Gallery, ensuring a simple and consistent installation process across platforms.

Installation Steps

  1. Open PowerShell in Administrator mode
  2. Run the following command to install the cmdlet module: 
    Install-Module SAPGatewayCmdlets -Repository PSGallery -Force

    This command:

    • Downloads the module from the official PowerShell Gallery
    • Installs it into your PowerShell environment
    • Registers all cmdlets for immediate use

Module Verification

To verify installation: 

Get-Module -ListAvailable "*SAPGateway*"

Licensing

The cmdlets support both trial and fully licensed activation.

Trial Licensing

Trial activation is automatic - no key is required. Once installed, you can begin using the cmdlets immediately.

Activating a Full License

If you have purchased a full license, you will receive a product key from the CData Orders Team.

Activate Your License

Run the following command:

Set-ModuleLicense ""

You should see a confirmation message indicating successful activation.

Common Licensing Questions

Can I use my license on multiple machines?

Depending on your subscription tier. Refer to your order confirmation or contact [email protected].

I lost my license key. What do I do?

Email [email protected] with your order number to have it resent.

Can I transfer my license to another machine?

Submit a license transfer request here: https://www.cdata.com/lic/transfer/.

Where can I manage my license?

Visit the CData Customer Portal: https://portal.cdata.com/.

Connection Configuration

Once the module is installed and licensed, you can establish a connection to SAP Netweaver Gateway using the 

Connect-SAP Netweaver Gateway cmdlet

After obtaining the needed connection properties, accessing SAP Netweaver Gateway data in PowerShell and preparing for replication consists of four basic steps.

SAP Gateway allows both basic and OAuth 2.0 authentication. You can use basic authentication to connect to your own account, or you can use OAuth to enable other users to retrieve data from your service with their accounts. In addition to authenticating, set the following connection properties to access SAP Gateway tables.

  • Url: Set this to the URL of your environment, or to the full URL of the service. For example, the full URL might appear as: https://sapes5.sapdevcenter.com/sap/opu/odata/IWBEP/GWSAMPLE_BASIC/. In this example, the environment URL would just be: https://sapes5.sapdevcenter.com.
  • Namespace: Set the appropriate Service Namespace. In the example above, IWBEP is the namespace. It is optional if the full URL to the service is specified.
  • Service: Set this to the service you want to retrieve data from. In the example above, the service is GWSAMPLE_BASIC. It is not required if the full URL is specified.

Authenticate via Basic Authentication

In basic authentication, you use your login credentials to connect. Set the following properties:

  • User: This is the username you use to log in to SAP Gateway.
  • Password: This is the password you use to log in to SAP Gateway.

Authenticate via OAuth Authentication

You can connect to SAP Gateway using the embedded OAuth connectivity (without setting any additional authentication connection properties). When you connect, the OAuth endpoint opens in your browser. Log in and grant permissions to complete the OAuth process. See the OAuth section in the online Help documentation for more information on other OAuth authentication flows.

Collecting SAP Netweaver Gateway Data

  1. Install the module: 

    Install-Module SAPGatewayCmdlets

  2. Connect to SAP Netweaver Gateway: 

     $sapgateway = Connect-SAPGateway -User $User -Password $Password -URL $URL -InitiateOAuth $InitiateOAuth

Querying SAP Netweaver Gateway Data in PowerShell

Once connected, you can query data using standard SQL like commands.

Example Query:

$results = Select-SAPGateway `
 -Connection $conn `
 -Table "SalesOrderLineItems" `
 -Columns "ProductID,Quantity" `
 -Where "ProductID != ''"

Display the results:

$results

You have now successfully accessed SAP Netweaver Gateway data from PowerShell!

Common Issues

Authentication Failed

Solution: Verify username, password, and security token. For OAuth applications, you may need to authorize CData in your application's security settings. Contact [email protected] for authorization assistance.

Network or Proxy Issues

Solution: Confirm firewall settings and outbound access. Most cloud applications use port 443.

Cmdlet Not Found

Solution: Ensure the module is installed- 

Get-Module -ListAvailable "*SAP Netweaver Gateway*"

Slow Queries

Solution:

  • Add filters to reduce dataset size
  • Use $Limit or $Top properties where supported
  • Contact [email protected] for optimization help

For additional connection troubleshooting, contact [email protected] with your specific error message.

What's Next?

Now that you have installed, licensed, and configured the PowerShell Cmdlets, here are some scenarios you can use to explore:


Get Support

If you need assistance:

FAQs (PowerShell Cmdlets)

Installation & Licensing

  • Do I need administrator rights to install the cmdlets?

    • Not always.

    • Windows PowerShell 5.1 (Windows): Administrator rights are recommended, especially when installing modules for all users.
    • PowerShell 7+ (Windows, macOS, Linux): You can install cmdlets for the current user without admin rights using: 
      Install-Module SAPGatewayCmdlets -Scope CurrentUser
  • Do I need to download an installer?

    • CData PowerShell Cmdlets are delivered through the PowerShell Gallery. Installation is performed via: 

    Install-Module SAPGatewayCmdlets -Repository PSGallery -Force

Connecting

  • How do I connect to multiple accounts for the same data source?

    • Create separate connection objects-each with different authentication properties:

    $conn1 = Connect-SAPGateway -User User1 -Password Pwd1
    $conn2 = Connect-SAPGateway -User User2 -Password Pwd2
  • Does PowerShell Cmdlets require a DSN?

    • Cmdlets do not use ODBC DSNs. All connection properties are passed directly in 

    Connect-SAP Netweaver Gateway
  • Can I connect through a proxy server?

    • Many cmdlets support proxy properties such as:

    • ProxyServer
    • ProxyPort
    • ProxyUser
    • ProxyPassword

    Refer to the data-source-specific Help documentation.

Performance & Troubleshooting

  • Why are my queries slow?

    • Common causes:

    • Missing filters (e.g., no WHERE clause)
    • Pulling large result sets
    • Latency from cloud APIs
    • Not using incremental strategies

    Try:

    • Filtering data (-Where parameter)
    • Selecting only required columns
    • Reviewing API throttling limits for your data source

    Contact [email protected] for query optimization assistance.

  • How do I enable logging?

    • Enable module logging with: 

    Set-ModuleLogging -Path "C:\logs\cdata.log" -Verbosity 3
    Upload the log file securely when working with CData Support.
  • What ports need to be open?

    • Most cloud applications (Salesforce, HubSpot, Dynamics, Google APIs, etc.) use: HTTPS (443)

    If your source requires additional ports, check its specific documentation or contact [email protected].

  • Can I use the cmdlets in containers (Docker, Kubernetes)?

    • Install PowerShell 7 in the container and install the module: 

    pwsh -Command "Install-Module SAPGatewayCmdlets -Force"
    Then authenticate normally.

General

  • Where can I find all supported SQL/command operations?

    • Each cmdlet includes a Help documentation set installed locally and available online: https://www.cdata.com/powershell/.

  • How often are PowerShell Cmdlets updated?

    • CData releases major annual updates plus incremental updates throughout the year. Check your customer portal or contact [email protected] for version availability.

  • Where can I find code examples?

    • Every Cmdlet includes examples in the Help documentation, plus online examples for many services: https://www.cdata.com/powershell/. Examples include:

    • Basic queries
    • Insert/update/delete
    • OAuth flows
    • File operations
    • API integration

For questions not covered in this FAQ, [email protected].

Ready to get started?

Download a free trial of the SAP Netweaver Gateway Cmdlets to get started:

 Download Now

Learn more:

👁 SAP Netweaver Gateway Icon
SAP Netweaver Gateway Data Cmdlets

An easy-to-use set of PowerShell Cmdlets offering real-time access to SAP Netweaver Gateway. The Cmdlets allow users to easily read, write, update, and delete live data - just like working with SQL server.